KFLF rl axis limited to 191% ?

Pages: [1]

« previous next »

Author

Topic: KFLF rl axis limited to 191% ? (Read 4903 times)

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	KFLF rl axis limited to 191% ? « on: May 02, 2014, 05:01:14 PM »

Is the KFLF rl axis limited to 191% (FF) ? or do I have my map defined incorrectly?
If it is capped @ 191% wouldn't that mean the rl (byte) variable is also capped at 191% ?


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: KFLF rl axis limited to 191% ? « Reply #1 on: May 02, 2014, 05:52:15 PM »

Yes to both


	Logged

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: KFLF rl axis limited to 191% ? « Reply #2 on: May 02, 2014, 06:02:38 PM »

So KFLF is no good for higher boost. boooo


	Logged

prj

Hero Member

Karma: +1072/-482
Offline

Offline

Posts: 6039

	Re: KFLF rl axis limited to 191% ? « Reply #3 on: May 03, 2014, 03:58:44 PM »

You should not even be using that map.

I personally replaced the rl axis with pvdk and use it for fuel correction for MAP activated methanol injection kits.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

marrakech

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 30

	Re: KFLF rl axis limited to 191% ? « Reply #4 on: November 01, 2014, 04:44:15 AM »

What is an RL?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: KFLF rl axis limited to 191% ? « Reply #5 on: November 01, 2014, 10:59:43 AM »

Quote from: prj on May 03, 2014, 03:58:44 PM

You should not even be using that map.

I personally replaced the rl axis with pvdk and use it for fuel correction for MAP activated methanol injection kits.

Necro bump from the noob above... but that is a great idea!


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

hammersword

Full Member

Karma: +31/-2
Offline

Offline

Posts: 136

Revlimit ECU tuning

	Re: KFLF rl axis limited to 191% ? « Reply #6 on: November 03, 2014, 05:04:04 PM »

ME7 is very smart ECU... Even if KFLF limits RL at 191.7% you can easily run 2+bar with MAFless setup by a small tweaking on FKKVS map

It is a good idea if you change the axis from RL to PVDK but you can easily see that 2550mbar = 191.7%, unless you change map sensor


	Logged

www.revlimit.gr
The Motronic Specialists....

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 10:32:35 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search