NefMoto > Technical > Tuning > 2002 A6 2.7T 6 speed Ak-box help
Pages: [1]
« previous next »
Author Topic: 2002 A6 2.7T 6 speed Ak-box help  (Read 4115 times)
Wfbeast70
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« on: May 13, 2014, 06:50:50 PM »
I have been searching on this website for quite some time before I decided that I wanted to try this route over driving/finding a shop that can install an APR/GIAC chip on my 2002 A6 2.7t 6sp. Now that I have decided to go this route I have a few questions. What XDF file do I use? My ECU is an AK-box, will an M-box XDF file work? I have decided to go with a tune that I have seen on here as a "base stage 1" tune and will log and tweak accordingly, but I have read that not having the right definition file can cause the maps to be off and cause a no start.

  Any help will be greatly appreciated.

P.S. I have my blue cable and laptop up and running and the car is mechanically sound with APR y-pipe upgraded diverter valves and I have a weekend project lined up to take car of the DIY piggies.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: May 13, 2014, 06:55:17 PM »
You can flash any M-box file, then use the M-box xdf. Welcome. I suggest a bit of reading as this has been covered ')
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Wfbeast70
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #2 on: May 13, 2014, 07:07:04 PM »
Thank you. I thought that it had with the auto versions, but I wanted to make sure I had a definite answer.
Logged
Wfbeast70
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #3 on: May 20, 2014, 10:12:42 PM »
Quote from: ddillenger on May 13, 2014, 06:55:17 PM
You can flash any M-box file, then use the M-box xdf. Welcome. I suggest a bit of reading as this has been covered ')

I have been reading through the S4Wiki and have been working on a tune based off the Jfonz stage 1 tune, a stock tune and the Stage II VR tune that is posted on the site. I have "finished" creating the tune. I have used the Checksum tools provided and see no errors on my end. I would greatly appreciate having some of the members here look over the tune and see if everything looks good for:

1. A tune that is going to start my car
2. A mild stage 1 tune that is smooth in daily driving
3. the tune does not have any glaring holes that can be caught before I flash in the car.

Car is a 2002 A6 2.7t 6sp. Hitachi MAF. Currently running the Jfonz beginner tune that is on the site. Noticed the hesitation and wanted to fix it immediately.

Thanks.

Logged
Wfbeast70
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #4 on: May 23, 2014, 07:11:02 AM »
Anybody? This is my first attempt at doing this so I would just like to know I converted the file correctly (L-box to M-box) and I made sure that this was for a Hitachi MAF.

Thank you.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 29, 2024, 10:13:55 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)