Greetings

I didn't find any existing program to read/write the 24c04 immo eeprom of the EDC15P+ through K-line (with a dumb KKL cable). Therefore I wrote a program that can read and write the contents of the immo eeprom in boot mode. I got the idea from ArgDub's great ME7_95040 EEPROM programmer. Just use a normal dumb KKL cable and start the ECU in boot mode.

Download the program here (.NET framework 4 required): https://bitbucket.org/JohnJocke/edc15p_immo_flasher/downloads/EDC15P_Immo_flasher_2014_05_13_v1.0.zip
I tested the program with EDC15P+. Dunno if it works with other EDC15 variants.

Complete source code with BSD license can be found here: https://bitbucket.org/JohnJocke/edc15p_immo_flasher/src

Btw, if someone knows how to read the eeprom with OBD (KWP1281) without security pin code, please drop a hint. 

great first post

many softeware are able to read it OBD ....
pass for eeprom access must be 12233

For edc15p+ connect pin 24 29f400 flash to GND
Power ON ECU
After about maybee 3-5 sec disconnect pin 24 from GND


"AEF" Is the program starting for you?

I cant get the prog to work i have tested it on different computers. Both xp and win7. Dont know what i do wrong? Somebody else have this problem?

I downloaded the program on another forum and it worked. I tried download from this forum again (have tried many times before) and now it works here to. Strange, but thanks for the program.