NefMoto > Technical > Flashing and Chipping > Problems with 8e0909518al
Pages: [1]
« previous next »
Author Topic: Problems with 8e0909518al  (Read 7962 times)
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87
« on: June 01, 2014, 09:15:10 AM »
Hi all,
after reading flash with NM my car won't start: flash memory not complete...  Angry

I wrote flash with NM and 8e0909518al.bin from this thread:
http://nefariousmotorsports.com/forum/index.php?topic=5718.0

Now car runs but got a yellow sign from ESP in front.

And i think the new file is stock  Huh
My one was tuned, crappy - but tuned  Wink

Some help for me?  Cry

Some Info:
01.Jun.2014 01:47:31.034: LOG: Successfully read ECU identification information
01.Jun.2014 01:47:31.044: USER: 100% complete.
01.Jun.2014 01:47:31.067: USER: Read 5 ECU info entries:
01.Jun.2014 01:47:31.086: USER:    0x92, System Supplier ECU Hardware Number: 0261208228
01.Jun.2014 01:47:31.096: USER:    0x94, System Supplier ECU Software Number: 1037368069
01.Jun.2014 01:47:31.106: USER:    0x91, Vehicle Manufacturer ECU Hardware Number: 0x0D, 8E0909018A  , 0xFF
01.Jun.2014 01:47:31.115: USER:    0x9B, Calibration Date: 8E0909518AL , 0002, 0x03002CED, 0x01000000, 0x0000, 1.8L R4/5VT    ,  G   
01.Jun.2014 01:47:31.123: USER:    0x9C, Calibration Equiment Software Number: 0x00010100

Engine: BFB 163hp  Year: 2003

Greetings
« Last Edit: June 01, 2014, 09:55:59 AM by narf0815 » Logged
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87
« Reply #1 on: June 01, 2014, 09:57:36 AM »
Original File:
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420
« Reply #2 on: June 01, 2014, 10:10:46 AM »
You can always compare file you read from the ECU with the file you wrote into it...
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #3 on: June 01, 2014, 10:29:06 AM »
Quote from: tjwasiak on June 01, 2014, 10:10:46 AM
You can always compare file you read from the ECU with the file you wrote into it...

Flash 518AK
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87
« Reply #4 on: June 01, 2014, 11:41:38 AM »
Thank You. Will try tomorrow.
Is this a stock one too?

The old one was AL. Do you mean it was the wrong one all time? The car was using gasoline like a tank in full speed...

If i load my old one with winols i recieve an error, because file is modified... Huh
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #5 on: June 01, 2014, 11:44:36 AM »
Quote from: narf0815 on June 01, 2014, 11:41:38 AM
Thank You. Will try tomorrow.
Is this a stock one too?

The old one was AL. Do you mean it was the wrong one all time? The car was using gasoline like a tank in full speed...

If i load my old one with winols i recieve an error, because file is modified... Huh

Please read this. It is causing your problem Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5747.0title=
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87
« Reply #6 on: June 02, 2014, 03:56:41 AM »
Quote from: ddillenger on June 01, 2014, 11:44:36 AM
Please read this. It is causing your problem Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5747.0title=

Solution for the "programming not finished" error. OK.

Maybe some wise words for my other questions?

 Undecided
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #7 on: June 02, 2014, 08:38:20 AM »
Search for NOREAD in your file with a hex editor. Fill that area with FF's.

Then import the file over the original (import original into winOLS first, then tuned file over top).
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87
« Reply #8 on: June 02, 2014, 09:56:17 AM »
will do that...

flashed your file and now i have a:
17881 - EVAP Leak Detection Pump: Open Circuit P1473 -- 004 -- No Signal/Communication

 Huh
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #9 on: June 02, 2014, 10:08:59 AM »
Quote from: narf0815 on June 02, 2014, 09:56:17 AM
will do that...

flashed your file and now i have a:
17881 - EVAP Leak Detection Pump: Open Circuit P1473 -- 004 -- No Signal/Communication

 Huh

CDLDP

181A8

change it from 01 to 00.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87
« Reply #10 on: June 02, 2014, 10:19:26 AM »
No winols available... Is ist save to drive with this?
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800
« Reply #11 on: June 02, 2014, 10:22:12 AM »
Quote from: narf0815 on June 02, 2014, 10:19:26 AM
No winols available... Is ist save to drive with this?

yes its just the north american version of the software we have crap you dont... like that
Logged
Giving your mom a tuneup
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87
« Reply #12 on: June 02, 2014, 01:29:06 PM »
Quote from: ddillenger on June 02, 2014, 10:08:59 AM
CDLDP

181A8

change it from 01 to 00.

Can you please check the file against yours if it is correct?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #13 on: June 02, 2014, 01:33:13 PM »
Quote from: narf0815 on June 02, 2014, 01:29:06 PM
Can you please check the file against yours if it is correct?


A+!
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87
« Reply #14 on: June 02, 2014, 01:50:43 PM »
Great. Thanks a lot.
Maybe you can look in my first posted file to give some feedback about the quality of tuning?

Update:
With your 518AK file i had again the "programming not finished" error. I had to Flash it 3 times until my ECU said "finished".

update2:
Should i open a New thread for analyze of my tuned.bin?
« Last Edit: June 03, 2014, 09:36:36 AM by narf0815 » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 07:31:54 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)