NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > 0261203968/969 OBD2 M3.8.1 Mk3 golf VR6
Pages: [1]
« previous next »
Author Topic: 0261203968/969 OBD2 M3.8.1 Mk3 golf VR6  (Read 13246 times)
c11rgd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9
« on: June 19, 2014, 03:21:03 PM »
I have the same issue, ECU 0261203968/969 OBD2 M3.8.1
The Eeprom 24C02 chip is on the underside of the PCB under the plastic shield.

Im guessing its the same method as Mk4 golf AGU Ecu, unsolder the immo and read the eeprom. then edit.

Can anyone else confirm this please?
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420
« Reply #1 on: June 19, 2014, 03:26:59 PM »
Yes it is proper way to deal with immobilizer - desolder, read/write, resolder. If you have proper programmer you might succeed in reading/writing without desoldering.
Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #2 on: June 19, 2014, 06:10:06 PM »
Quote from: tjwasiak on June 19, 2014, 03:26:59 PM
If you have proper programmer you might succeed in reading/writing without desoldering.

Do you mean UPA reader???
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420
« Reply #3 on: June 19, 2014, 07:31:04 PM »
I did not mean any device but heard some people did it without desoldering. Desoldering PSOP8 is not that big deal for me so and I have only a Willem...
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #4 on: July 04, 2014, 05:24:36 AM »
Is there a way to test it afterwards on the bench? Like channel 91 at the M3.83 ecus
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #5 on: July 30, 2014, 09:01:10 AM »
Just opened the ECU to desolder the 24c02 but there is only one little thing with 8 legs.

Are these two sealed ones 24c02 too? looks nor original...  Cry

https://www.dropbox.com/s/8m84d4x1vee16qk/Foto%2030.07.14%2017%2044%2008.jpg

https://www.dropbox.com/s/i0amip9jnjd266u/Foto%2030.07.14%2017%2043%2054.jpg
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #6 on: August 02, 2014, 08:47:46 AM »
Okay, i was able to get rid of the epoxy sh*t by a little bit of hot air station love.




i desolderen both chips and hope thy are both 24c02

the first one on top of the board looks like this and was all 00


the second one under the board looks like this and the file is attached.


the file itself looks strange and little bit empty. (attached)
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #7 on: August 02, 2014, 08:51:48 AM »
here is the file

ecu looks like:



any input here?

I checked the immo like this one and it shows 0


i am not sure if this works on m3.8.1 ecus with external immo-box (immo1 i think)
Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #8 on: August 02, 2014, 09:43:44 PM »
Did you check this --> http://wiki.ross-tech.com/wiki/index.php/Immobilizer#Immobilizer_Generation_1 ?? ?? ??
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #9 on: August 02, 2014, 09:57:09 PM »
Should be this one:
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #10 on: August 02, 2014, 10:00:14 PM »
Quote from: ddillenger on August 02, 2014, 09:57:09 PM
Should be this one:

Yes should be it. Also check eeprom marks.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #11 on: August 03, 2014, 03:40:11 AM »
Hi,

i dont think that this is the right chip. Its B57554 which is a LM2903DR IC. There is no edge/dot in it find the top and bottom.
I know that this is the spot where the early 1.8t m3.83 have the 24c02 located but on this ecu it isnt.

I hope user c11rgd will chime in here.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #12 on: August 05, 2014, 10:28:06 AM »
Okay so i got a file from another board which should work. Adaption channel 91 (immo related) turned from 0 to 1 which means immo is off.

attached both files and the before and after screenshot.
time to find out what is responsible for immo and what changed the numbers for WSC/GarageID
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 06:34:29 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)