NefMoto > Technical > Tuning > DPF off VW EDC16
Pages: [1]
« previous next »
Author Topic: DPF off VW EDC16  (Read 8384 times)
hipeka
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 85
« on: June 20, 2014, 11:31:52 AM »
Hi,

Can someone help me with DPF off with VW transporter T5?
I have use EcuSAFE to remove DPF:s att 3 cars and it work "fine". I know its nor proper way to do it but at least it work.

Current file which EcuSAFE cant do it right is 070906016EC

Here are two one which work fine without DPF and the one that i cant get work.

Edit: I remove those EcuSafe files and try to mod those better.
« Last Edit: June 22, 2014, 11:40:59 PM by hipeka » Logged
prj
Hero Member
*****

Karma: +1072/-482
Offline Offline

Posts: 6038
« Reply #1 on: June 20, 2014, 01:45:25 PM »
Yes all this ecusafe cars work "fine", because entire fault class table is wiped, so they can not ever show any fault codes.

Let me guess, you charge money for that shit?

The DPF switch is on in all of your "dpf off" files.
« Last Edit: June 20, 2014, 01:55:46 PM by prj » Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
TheDSI
Full Member
***

Karma: +12/-0
Offline Offline

Posts: 78
« Reply #2 on: June 21, 2014, 02:49:46 AM »
Quote from: prj on June 20, 2014, 01:45:25 PM
Yes all this ecusafe cars work "fine", because entire fault class table is wiped, so they can not ever show any fault codes.

Let me guess, you charge money for that shit?

The DPF switch is on in all of your "dpf off" files.

+1
Logged
hipeka
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 85
« Reply #3 on: June 21, 2014, 03:05:27 AM »
All these are my friends cars and i havent take any money for these.

I know its not proper way.

New DPF cost around 2000€ here and all these cars are driven over 400 000km. These are made to get clogged DPF out.

I have tried to search solution for this EC file. Could the DPF switch be in 1D5934?
There is pattern "7F FF 80 00 00 00 02 8F 01"
« Last Edit: June 21, 2014, 08:00:00 AM by hipeka » Logged
hipeka
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 85
« Reply #4 on: June 22, 2014, 11:50:40 PM »
Quote from: hipeka on June 21, 2014, 03:05:27 AM
Could the DPF switch be in 1D5934?
There is pattern "7F FF 80 00 00 00 02 8F 01"

I change 1D5934 01 to 00 and now that car work fine.  I think thats the DPF Off switch because now two last temp sersors values are -273C and Particle Filter Load shows 0% also pressure differential sensor seems to be off to.

Can someone tell me is that only mod needed or is there still some switch or DTC:s that should be disable?
Logged
prj
Hero Member
*****

Karma: +1072/-482
Offline Offline

Posts: 6038
« Reply #5 on: June 23, 2014, 04:02:32 AM »
That is correct switch, you do not need to do anything else.

Now get your friends cars back and remove that ecusafe sh!t out of them as well.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
hipeka
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 85
« Reply #6 on: June 23, 2014, 04:15:19 AM »
Quote from: prj on June 23, 2014, 04:02:32 AM
That is correct switch, you do not need to do anything else.

Now get your friends cars back and remove that ecusafe sh!t out of them as well.

Thanks for confirmation.

I will do that asap.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 04:05:47 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)