Pages: [1]
Author Topic: ECU Swap ??  (Read 5528 times)
Tune Me Up
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« on: June 24, 2014, 07:26:28 PM »

Hi guys


My cars ecu has the part number: 06A 906 032 HJ.

Would it be possible to swap it with an ecu with the part number: 06A 906 032 DR and just copy the map file over from the HJ one using nefmoto ?



Thanks Wink
Logged
fknbrkn
Hero Member
*****

Karma: +177/-18
Offline Offline

Posts: 1402


mk4 1.8T AUM


« Reply #1 on: June 25, 2014, 03:06:30 AM »

dont think so
DR is immo2 unit and HJ is immo3
you can swap ECU and copy LDRXN & LDRXNZK maps from HJ to make it 180hp
Logged
Tune Me Up
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #2 on: June 25, 2014, 07:09:41 AM »

Thanks for the reply Wink


Is there anywhere that has a list showing what ECU's are immo2 and immo3 ?
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420


« Reply #3 on: June 25, 2014, 08:14:55 AM »

You can check it in ETKA (even online @www.vagcat.com). You just have to know when transition from IMMO2 to IMMO3 took place.
Logged
Tune Me Up
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #4 on: June 25, 2014, 07:25:33 PM »

Thanks I'll have a look Wink


From what I've been reading so far, both the HJ and the DR ECU's were fitted to my car with the AUM engine code.
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420


« Reply #5 on: June 26, 2014, 03:38:16 AM »

But for different model years (it will be shown in ETKA - even if the change was during model year - it will show you VIN numbers with older and newer part).
Logged
Tune Me Up
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #6 on: July 05, 2014, 04:15:05 PM »

OK thanks Wink


Is it possible to copy the eprom and EEProm through the OBD port?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)