Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Flashing and Chipping
>
Chip differance
Pages: [
1
]
« previous
next »
Author
Topic: Chip differance (Read 4775 times)
Bi-turbo
Full Member
Karma: +1/-7
Offline
Posts: 164
Chip differance
« on: June 27, 2014, 02:56:35 AM »
Solderd a new chip into a 551C
Car will turn over but wont fire.
The chip is AM29F400BB-90SC
The previous chip was AM29F400BB-90SI
Does the 90SC/SI make a differance???
Logged
tjwasiak
Sr. Member
Karma: +26/-0
Offline
Posts: 420
Re: Chip differance
« Reply #1 on: June 27, 2014, 03:39:31 AM »
It should work, maybe bad soldering/bad programming.
Logged
TCSTigersClaw
Sr. Member
Karma: +15/-6
Offline
Posts: 353
Re: Chip differance
« Reply #2 on: June 27, 2014, 04:48:07 AM »
It should work yes , don`t worry, take your time ,desolder it and solder it again carefully ,99% the soldering was bad
Logged
VAG cars newbie tuner
Bi-turbo
Full Member
Karma: +1/-7
Offline
Posts: 164
Re: Chip differance
« Reply #3 on: June 27, 2014, 05:01:58 AM »
Ok thanks, will check them over
Logged
f1torrents
Sr. Member
Karma: +17/-1
Offline
Posts: 303
Re: Chip differance
« Reply #4 on: June 27, 2014, 11:57:04 AM »
Did you re-flash the chip to your stock file after the soldering?
You may need to boot mode flash it.
Does vcds connect to the ECU?
Logged
Bi-turbo
Full Member
Karma: +1/-7
Offline
Posts: 164
Re: Chip differance
« Reply #5 on: June 28, 2014, 05:33:09 AM »
It was a blank new chip and i solderd it in and boot flashed it but i have found the issue, one of the pads that the chip solders to had broke so the link under the chip wasnt making a connection.
Logged
_nameless
Hero Member
Karma: +342/-466
Offline
Posts: 2800
Re: Chip differance
« Reply #6 on: June 28, 2014, 06:45:27 PM »
I opened a amb ecu to find that someone soldered in a new chip, the solder connections looked real bad. Seems they new this too... they used some hard foam and glued it to the chip to push down on it when the case was screwed together. I removed it and replaced it with stock
Logged
Giving your mom a tuneup
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 23, 2024, 07:34:45 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
