Pages: [1]
Author Topic: 4D0907560CE looking for OLS or XDF  (Read 6282 times)
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« on: July 05, 2014, 11:50:59 AM »

Hopefully someone can help... Mostly interested in O2 and SAI disable.

It's an Audi 4.2 AWN, ME7.1.1 ECU.
Logged
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #1 on: July 06, 2014, 02:29:08 PM »

Mapping seems similar to 560CL, but I can't find any definitions for that either.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #2 on: July 06, 2014, 02:49:23 PM »

Mapping seems similar to 560CL, but I can't find any definitions for that either.

Go into the tuned files section, and find the 559E S6 manual file I posted. In that thread is an xdf. I'm not saying it's all correct mind you as I made that xdf many moons ago. The maps are NOT in the same place, but the codewords are.

Other than that, you're boned. I'm the only one that works on these and I'm pretty busy. Post any questions you have with possible addresses after looking yourself and I will tell you what's going on.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #3 on: July 06, 2014, 05:55:18 PM »

Awesome, thanks!
So the 559E will cross-flash to my ECU then? I do plan on going 6-speed eventually.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #4 on: July 06, 2014, 07:16:23 PM »

Yes, but there is a lot more to it than just flashing the 559E.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #5 on: July 07, 2014, 02:48:50 PM »

Apart from the obvious recoding and EEPROM image, what else is needed?
Getting a bit off topic, but it would be a good thing to note, so I don't have to ask later.  Grin
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #6 on: July 07, 2014, 02:49:48 PM »

One's an A6, one's an S6. Rewiring the intake flaps, properly tuning that so as not to leave a hole in the powerband, setting up fueling, etc, etc.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
digitalhippie
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 111


« Reply #7 on: December 06, 2014, 12:51:35 PM »

Would that xdf apply to 4D0907560AF for the codewords?  If so, where can I find that xdf now?

Trying to help a friend code out precats and sai on a 2001 audi a8l 4.2
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.062 seconds with 18 queries. (Pretty URLs adds 0s, 0q)