Pages: [1]
Author Topic: How to remove RMP needle from cluster  (Read 2880 times)
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1414



« on: January 02, 2019, 11:10:04 AM »

I have problem to remove RPM needle, the KMH,temp and fuel go easy with hand. But RPM is so hard, i have B5 and TT cluster the problem ist same?
Does anybody have any idea?
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #1 on: January 02, 2019, 12:04:43 PM »

Turn anticlockwise and pull at the same time - it must go off
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1414



« Reply #2 on: January 02, 2019, 12:11:59 PM »

Thank you very much. That was easy remove. Still on TT it was hard to remove but i did it with your method. On B5 it was easy
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #3 on: January 02, 2019, 12:35:10 PM »

Worst are the rb8 clusters Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)