Pages: 1 [2]
Author Topic: Good Galletto Software?  (Read 40727 times)
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #15 on: December 08, 2013, 06:22:25 PM »

Use a program called "mprog"
Logged
JPower
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« Reply #16 on: December 09, 2013, 02:28:44 AM »

Hands up for f1torrents! Thanks!!  Wink
Logged
lowvo
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 51


It's personal


« Reply #17 on: December 18, 2015, 08:51:08 AM »

Old thread I know.  I had success bench flashing with Galletto 1260 and silver and blue ebay FTDI cable after changing the serial number in .exe file with hex editor at 0249E90. 
Logged

Laugh at yourself
dadal
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #18 on: December 27, 2015, 05:27:33 PM »

Thanks for this helpful post, I have it successfully completed. my KKL cable is ready  Wink

 a question:

How did you know that ID/serial nummer was at offset  0249E90 HuhHuhHuh !!!!!!

I want to try this with other programs too 
Logged
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #19 on: October 19, 2016, 12:39:56 PM »

So I copied over the data to the galleto exe and it notices my cable, but when I try boot mode it fails? Has anybody got a genuine vcds cable to work with galleto? I have it working with me7 logger and vcds. I have the VCP drivers installed too.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #20 on: October 19, 2016, 02:05:00 PM »

Has anybody got a genuine vcds cable to work with galleto?

Yes.

The serial number is likely RT000001
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #21 on: October 19, 2016, 02:29:30 PM »

Yes, I inserted that into the galleto exe. I open galleto and it notices the cable but it says bootmode failed?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #22 on: October 19, 2016, 02:31:32 PM »

Yes, I inserted that into the galleto exe. I open galleto and it notices the cable but it says bootmode failed?

No issues. Note that I am using the VCP drivers, and galletto may not recognize it if it isn't on COM1 or COM2
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)