hackish
Full Member
Karma: +1/-1
 Offline
Posts: 56
|
 |
« Reply #15 on: October 20, 2015, 07:36:38 AM »
|
|
|
I tried this and it worked great. Thank you.
To expand on the original topic, can we discuss deleting unused functions to reclaim space and repurposing that space for new, custom functions? I've done it with SLS and am currently deleting DSLSLRS.
My concern is identifying if deleted function was called or was part of the main runtime loop and how to handle either case with new functions. i.e. if a want to write a called function in the place of a runtime loop function that gets ran all the time.
You can easily just write a stub patch. Replace the function call with a branch to your stub, make the function call along with whatever extra function you want, then jump back to the instruction after the branch. In high level code it's the equivalent of using a couple of GOTO's. For your patches you're better off to follow the ABI so you can write the patches in C rather than assembler. It's far more productive and a good C compiler makes all sorts of messy optimizations without you having to think about it. |
|
|
|
|
Logged
|
|
|
|
|
dream3R
|
|
« Reply #16 on: December 27, 2015, 08:57:57 PM »
|
|
|
Thanks guys. So, to be safe I should [-r0] all Registies used in a new function at the beginning and then [+r0] then back at the end?
Does this sound unreasonable?
Think of it as pop and push (stack) |
|
|
|
|
Logged
|
|
|
|
flamy
Full Member
Karma: +6/-0
Offline
Posts: 56
|
|
« Reply #17 on: December 28, 2015, 12:39:53 AM »
|
|
|
I also started with IDA Pro a few days ago to try out some code changes.
Is there any possibility to mass-rename adresses?
ME7Info is able to extract lots of RAM variables from a binary.
It would be nice to import them to IDA Pro.
|
|
|
|
|
Logged
|
|
|
|
|
dream3R
|
|
« Reply #18 on: December 28, 2015, 01:37:29 AM »
|
|
|
I also started with IDA Pro a few days ago to try out some code changes.
Is there any possibility to mass-rename adresses?
ME7Info is able to extract lots of RAM variables from a binary.
It would be nice to import them to IDA Pro.
I think everyone want a python script to-do that, give it a shot? |
|
|
|
|
Logged
|
|
|
|
TijnCU
Hero Member
Karma: +60/-4
Offline
Posts: 690
flying brick
|
|
« Reply #19 on: December 28, 2015, 01:46:49 AM »
|
|
|
You can write them into the disassembly with this AutoIt script from prj. |
|
|
|
|
Logged
|
|
|
|
|
dream3R
|
|
« Reply #20 on: December 30, 2015, 06:59:56 PM »
|
|
|
You can easily just write a stub patch. Replace the function call with a branch to your stub, make the function call along with whatever extra function you want, then jump back to the instruction after the branch. In high level code it's the equivalent of using a couple of GOTO's. For your patches you're better off to follow the ABI so you can write the patches in C rather than assembler. It's far more productive and a good C compiler makes all sorts of messy optimizations without you having to think about it.
Like the idea dude. There's a few empty ones in most code (stubs) |
|
|
|
|
Logged
|
|
|
|
Khendal
Full Member
Karma: +9/-8
Offline
Posts: 226
|
|
« Reply #21 on: December 18, 2016, 03:07:02 PM »
|
|
|
I'm interesenting to apply a patch code...but i need first to disassembly the bin file...
i have this one :
Seat Leon Cupra R 1.8T BAM 225HP ME7.5 1ML906032A 0261208221 367220
Could you please advice me which settings i need to use with IDA pro?
Thanks
|
|
|
|
|
Logged
|
|
|
|
TijnCU
Hero Member
Karma: +60/-4
Offline
Posts: 690
flying brick
|
|
« Reply #22 on: March 14, 2018, 11:36:35 AM »
|
|
|
A summary of options to code in IDA:
- You can go to hex-view and press F2 to manually write code.
- you can use the patch functionality (edit>patch program>byte/word/assemble), in the patch byte function you can paste 16 bytes at a time. For most smaller functions this works quite well.
In my IDA version 6.1, patch code was not enabled. I manually enabled it by going to IDA\cfg\>idagui.cfg and look for patch submenu and set it to YES.
- You can import a bin file to a specific offset: go to File>Load file>Additional binary file... Leave "loading segments" empty, fill in the correct offset in "Loading Offset" (for example 0x8F0000) and uncheck Create segments to load it directly into your project.
|
|
|
|
« Last Edit: March 18, 2018, 08:04:49 AM by TijnCU »
|
Logged
|
|
|
|
totti
Full Member
Karma: +15/-29
Offline
Posts: 227
|
|
« Reply #23 on: August 07, 2021, 01:12:23 PM »
|
|
|
Hi,
If I would like to add a custom code which has to changes more variables what is the best solution? 1 function which contains all of the variable changes and link every original variable change to the function or have more functions which are just changes only 1 variable and link the specified variable changes to the functions.
Maybe I give a short example: For pops and bangs I changes only zwout and fuel cut. I have 2 functions 1 is for zwout changes 1 is for fuel cut. I found 3 zwout chang functions in the original code and I changed these movb commands to call with the cutom function address. I also found fuel cut movb and changed it to the custom function.
Now I think about the merge the 2 functions and link all of the relevant movb commands.
|
|
|
|
|
Logged
|
|
|
|
|
prometey1982
|
|
« Reply #24 on: September 11, 2022, 06:58:08 AM »
|
|
|
Slightly modified prj's Python code for loading a2l It's also define constants and bitfield enums and assign adress to it. import idc
import idaapi
def processrom(min, max):
if min > 0:
min = min - 1
curaddr = idc.FindUnexplored(min, idc.SEARCH_DOWN)
while curaddr < max:
if idc.MakeFunction(curaddr) != True:
idc.MakeCode(curaddr)
curaddr = idc.FindUnexplored(curaddr, idc.SEARCH_DOWN)
return
def a2l(filename):
lastvarname = ""
lastaddress = ""
with open(filename) as fp:
f = fp.read()
measurements = f.split("/begin MEASUREMENT")
measurements.pop(0)
print("Found: %d measurement(s)" % len(measurements))
for m in measurements:
namefound = 0
addrfound = 0
name = ""
addr = ""
is_enum = False
bit_mask = 0
for l in m.split("\n"):
l = l.strip()
if (len(l) > 0):
if (namefound == 0):
name = l
namefound = 1
elif (l.startswith("BIT_MASK")):
is_enum = True
bit_mask = int(l.split(" ")[1], 16)
elif (l.startswith("ECU_ADDRESS")):
addr = l[12:]
addrfound = 1
break
if (addrfound != 1):
print("ERROR")
elif (is_enum):
enum_name = "enum_" + addr[2:]
enum_id = idc.GetEnum(enum_name)
if (enum_id == 4294967295L):
enum_id = idc.AddEnum(-1, enum_name, 0)
idc.OpEnumEx(int(addr, 0), -1, enum_id, 0)
idc.MakeNameEx(int(addr, 0), "", 0)
if (not idc.IsBitfield(enum_id)):
idc.SetEnumBf(enum_id, 1)
idc.AddConstEx(enum_id, name, bit_mask, bit_mask)
else:
idc.MakeNameEx(int(addr, 0), name, 1)
characteristics = f.split("/begin CHARACTERISTIC")
characteristics.pop(0)
print("Found: %d characteristics(s)" % len(characteristics))
for m in characteristics:
namefound = 0
addrfound = 0
name = ""
addr = ""
is_enum = False
bit_mask = 0
for l in m.split("\n"):
l = l.strip()
if (len(l) > 0):
if (namefound == 0):
name = l
namefound = 1
elif (l.startswith("/begin IF_DATA ETK")):
addr = l.split(" ")[5]
#addr = l[28:7]
addrfound = 1
break
if (addrfound != 1):
print("ERROR", name)
else:
idc.MakeUnknown(int(addr, 0), 1, idaapi.DOUNK_SIMPLE)
idc.MakeNameEx(int(addr, 0), name, 1)
return
|
|
|
|
|
Logged
|
|
|
|
sonflasch
Full Member
Karma: +12/-2
Offline
Posts: 68
|
|
« Reply #25 on: October 23, 2022, 05:56:29 AM »
|
|
|
Slightly modified prj's Python code for loading a2l It's also define constants and bitfield enums and assign adress to it. import idc
import idaapi
def processrom(min, max):
if min > 0:
min = min - 1
curaddr = idc.FindUnexplored(min, idc.SEARCH_DOWN)
while curaddr < max:
if idc.MakeFunction(curaddr) != True:
idc.MakeCode(curaddr)
curaddr = idc.FindUnexplored(curaddr, idc.SEARCH_DOWN)
return
def a2l(filename):
lastvarname = ""
lastaddress = ""
with open(filename) as fp:
f = fp.read()
measurements = f.split("/begin MEASUREMENT")
measurements.pop(0)
print("Found: %d measurement(s)" % len(measurements))
for m in measurements:
namefound = 0
addrfound = 0
name = ""
addr = ""
is_enum = False
bit_mask = 0
for l in m.split("\n"):
l = l.strip()
if (len(l) > 0):
if (namefound == 0):
name = l
namefound = 1
elif (l.startswith("BIT_MASK")):
is_enum = True
bit_mask = int(l.split(" ")[1], 16)
elif (l.startswith("ECU_ADDRESS")):
addr = l[12:]
addrfound = 1
break
if (addrfound != 1):
print("ERROR")
elif (is_enum):
enum_name = "enum_" + addr[2:]
enum_id = idc.GetEnum(enum_name)
if (enum_id == 4294967295L):
enum_id = idc.AddEnum(-1, enum_name, 0)
idc.OpEnumEx(int(addr, 0), -1, enum_id, 0)
idc.MakeNameEx(int(addr, 0), "", 0)
if (not idc.IsBitfield(enum_id)):
idc.SetEnumBf(enum_id, 1)
idc.AddConstEx(enum_id, name, bit_mask, bit_mask)
else:
idc.MakeNameEx(int(addr, 0), name, 1)
characteristics = f.split("/begin CHARACTERISTIC")
characteristics.pop(0)
print("Found: %d characteristics(s)" % len(characteristics))
for m in characteristics:
namefound = 0
addrfound = 0
name = ""
addr = ""
is_enum = False
bit_mask = 0
for l in m.split("\n"):
l = l.strip()
if (len(l) > 0):
if (namefound == 0):
name = l
namefound = 1
elif (l.startswith("/begin IF_DATA ETK")):
addr = l.split(" ")[5]
#addr = l[28:7]
addrfound = 1
break
if (addrfound != 1):
print("ERROR", name)
else:
idc.MakeUnknown(int(addr, 0), 1, idaapi.DOUNK_SIMPLE)
idc.MakeNameEx(int(addr, 0), name, 1)
return
Hello all I use the code from prometey1982 so far without any problems. now i have another a2l which looks a little different. here as an example: /begin MEASUREMENT B_dslvh
"Bedingung Ladedrucksensor vorhanden"
UWORD
B_TRUE
1
100
0.0
255.0
/begin IF_DATA DIM_X
KP_BLOB 0xFD00 INTERN BYTE
/end IF_DATA
/begin IF_DATA MCMESS
KP_BLOB 0xFD00 INTERN
/end IF_DATA
BIT_MASK 0x8000
/end MEASUREMENT
I have rewritten the code so far and everything works except for the ENUMS entry (it does not write ENUMS as a list). he writes eg the enum mentioned above as a single measured value (all others under the address will be ignored) someone an idea? thanks for any hint #Load a2l = a2l("C:\my.a2l")
import idc
import idaapi
def processrom(min, max):
if min > 0:
min = min - 1
curaddr = idc.FindUnexplored(min, idc.SEARCH_DOWN)
while curaddr < max:
if idc.MakeFunction(curaddr) != True:
idc.MakeCode(curaddr)
curaddr = idc.FindUnexplored(curaddr, idc.SEARCH_DOWN)
return
def a2l(filename):
lastvarname = ""
lastaddress = ""
with open(filename) as fp:
f = fp.read()
measurements = f.split("/begin MEASUREMENT")
measurements.pop(0)
print("Found: %d measurement(s)" % len(measurements))
for m in measurements:
namefound = 0
addrfound = 0
name = ""
addr = ""
is_enum = False
bit_mask = 0
for l in m.split("\n"):
l = l.strip()
if (len(l) > 0):
if (namefound == 0):
name = l
namefound = 1
elif (l.startswith("BIT_MASK")):
is_enum = True
bit_mask = int(l.split(" ")[1], 16)
elif (l.startswith("KP_BLOB")):
#addr = l[12:]
#print(l)
addr = l
addr = addr.replace("EXTERN","")
addr = addr.replace("WORD","")
addr = addr.replace("BYTE","")
addr = addr.replace("LONG","")
addr = addr.replace("DP_BLOB","")
addr = addr.replace("KP_BLOB","")
addr = addr.replace("INDIRECT","")
addr = addr.replace(" ","")
addr = addr.replace("INTERN","")
addr = addr.replace("EXTERN","")
addr = addr.replace("IN","")
addr = addr.replace("DIRECT","")
#print(addr)
addrfound = 1
break
if (addrfound != 1):
print("ERROR")
elif (is_enum):
enum_name = "enum_" + addr[2:]
enum_id = idc.GetEnum(enum_name)
if (enum_id == 4294967295L):
enum_id = idc.AddEnum(-1, enum_name, 0)
idc.OpEnumEx(int(addr, 0), -1, enum_id, 0)
idc.MakeNameEx(int(addr, 0), "", 0)
if (not idc.IsBitfield(enum_id)):
idc.SetEnumBf(enum_id, 1)
idc.AddConstEx(enum_id, name, bit_mask, bit_mask)
else:
idc.MakeNameEx(int(addr, 0), name, 1)
characteristics = f.split("/begin CHARACTERISTIC")
characteristics.pop(0)
print("Found: %d characteristics(s)" % len(characteristics))
for m in characteristics:
namefound = 0
addrfound = 0
name = ""
addr = ""
is_enum = False
bit_mask = 0
for l in m.split("\n"):
l = l.strip()
if (len(l) > 0):
if (namefound == 0):
name = l
namefound = 1
elif (l.startswith("DP_BLOB DIRECT")):
addr = l
addr = addr.replace("DP_BLOB DIRECT","")
#addr = l[18:7]
addrfound = 1
break
if (addrfound != 1):
print("ERROR", name)
else:
idc.MakeUnknown(int(addr, 0), 1, idaapi.DOUNK_SIMPLE)
idc.MakeNameEx(int(addr, 0), name, 1)
return |
|
|
|
|
Logged
|
|
|
|
|
