Pages: 1 [2]
Author Topic: Wideband logging using rear O2 sensor inputs?  (Read 36623 times)
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923


« Reply #15 on: May 23, 2011, 08:25:55 PM »

Is it in this thread or some other one where somebody posted a bit of info which indicates that O2 readings below certain voltage (extra lean) will trigger a routine in ECU to dump the fuel as an emergency measure.
Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!


« Reply #16 on: May 23, 2011, 08:27:06 PM »

That would make sense as voltage drops with lambda.  I could flip the voltages around, so that rich = high and lean = low...
Logged
ElementalVoid
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 43


« Reply #17 on: May 23, 2011, 09:41:35 PM »

Is it in this thread or some other one where somebody posted a bit of info which indicates that O2 readings below certain voltage (extra lean) will trigger a routine in ECU to dump the fuel as an emergency measure.

I think this thread is what you're thinking of:
http://www.nefariousmotorsports.com/forum/index.php/topic,524.0.html
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #18 on: May 24, 2011, 01:38:15 AM »

That would make sense as voltage drops with lambda.  I could flip the voltages around, so that rich = high and lean = low...

Yup. That should do it if that is the problem
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!


« Reply #19 on: May 24, 2011, 11:35:14 PM »

Well... it's not the wideband causing the fuel dump.  It happened twice today with the narroband connected... now I get to figure out what is causing it.. hooray!
Logged
Rick
Hero Member
*****

Karma: +63/-4
Offline Offline

Posts: 704


« Reply #20 on: May 25, 2011, 10:18:36 AM »

Cars with EGT sensors I set BTS protection exactly the same as LAMFA.  If things get too hot the sensors add the needed fuel.  Maybe try changing the BTS maps to see if it is them.  Is overboost related calibration ok, and no knock when this happens?

Rick
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #21 on: May 25, 2011, 10:22:22 AM »

I'm still thinking bad EGT sensors. This is a common problem and it doesn't always show up in logs.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!


« Reply #22 on: May 25, 2011, 10:41:58 AM »

It's possible I guess... they have less than 10,000 miles on them though.  I need to switch back to my tune since this was on Tony's file with the antilag mods, and see if I hit it again.

Hopefully I will have time to look at it this weekend.  The overboost is likely due to the K16 hybrids and running Tony's K04 tune.

edit:  forgot to mention no knock.
« Last Edit: May 25, 2011, 11:14:55 AM by Jason » Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!


« Reply #23 on: May 27, 2011, 11:31:43 AM »

Woooo!  It's leaning out bigtime in third gear, but is around 11:1 in first and second gear.  Will fix and report back.
Logged
IGA
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #24 on: April 04, 2017, 09:35:32 AM »

So, finally is it the issue to connect Wideband to rear O2 sensor inputs ?
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #25 on: April 08, 2021, 05:59:59 AM »

Any new input about this? I also want to log wideband on 2.7T
Is rear O2 good input?
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #26 on: April 08, 2021, 06:19:31 AM »

I always used it, never had issues.
I have an external lambda on the dyno, and the reading matches both on the dyno as well as in the log when using the same factor.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)