Pages: [1]
Author Topic: MSLUB address on wiki?  (Read 4450 times)
rekrull
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 9


« on: July 31, 2014, 01:59:31 PM »

I thought I was going crazy and couldn't figure out why I was getting all 0's for my MSLUB table when using the address from the wiki. It appears that there is typo in the address listed in the wiki. I believe it should be 0x1A698 with the column scale starting at 0X1A688. It's 16bit, 1 row with 8 columns.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: July 31, 2014, 02:28:31 PM »

Thanks for the heads up!

I assume this is for L-Box? Never checked it, I don't have a tip S4 Smiley
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
rekrull
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 9


« Reply #2 on: July 31, 2014, 02:58:30 PM »

Yes, it's for a an L-box, 8D0907551L in case someone is searching.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #3 on: July 31, 2014, 03:04:34 PM »

Fixed. Thank you again for posting the correction.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
metronet
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 73



« Reply #4 on: September 14, 2014, 01:17:01 AM »

I believe it should be 0x1A698 with the column scale starting at 0X1A688. It's 16bit, 1 row with 8 columns.

Wouldn't this be starting at 0x1A698 to 0x1A6A8 and a total of 2 Bytes (16 bit)?


Edit: 0x1A688 is correct. I just realized the Column scale is referring to the X-Axis.


Code:
    <XDFAXIS id="x" uniqueid="0x0">
      <EMBEDDEDDATA mmedtypeflags="0x02" mmedaddress="0x1A688" mmedelementsizebits="16" mmedcolcount="8" mmedmajorstridebits="16" mmedminorstridebits="0" />
      <units>V</units>
      <indexcount>8</indexcount>
      <decimalpl>4</decimalpl>
      <embedinfo type="1" />
      <datatype>0</datatype>
      <unittype>0</unittype>
      <DALINK index="0" />
      <MATH equation="0.000391 * X">
        <VAR id="X" />
      </MATH>
    </XDFAXIS>
« Last Edit: September 22, 2014, 02:02:05 PM by metronet » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)