Pages: [1]
Author Topic: Sorry, another request  (Read 10646 times)
Dave87VRS
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« on: August 09, 2014, 10:43:57 AM »

still awaiting on MTX to get back to me. would one of you please checksum this file for me? showing 2 errors

many thanks in advance
Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1454


mk4 1.8T AUM


« Reply #1 on: August 10, 2014, 01:43:54 AM »

here you go
btw i do not reccomend you toflash that file
Logged
Allabout
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 54


« Reply #2 on: August 10, 2014, 01:53:09 AM »

here you go
btw i do not reccomend you toflash that file

Very interesting, willing to ellaborate as why you think so?

Did you notice something wrong in the file?
Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1454


mk4 1.8T AUM


« Reply #3 on: August 10, 2014, 02:08:47 AM »

there is a lot of PID changes, most of them by "% tuning" (102% WGDC at KFLDIMX and KFLDRL with stock 95% KFLDIMX limiter ...). im not pro, but entire stock PID section are good for stock turbo with 1.1-1.2 bar IMO. only adjust KFLDHBN and all ok.
KFMIRL are different and KFMIOP are stock..
KFLDHBN, KFDLULS, LAMFA, KFMLDMX, etc.. are stock.
Logged
Dave87VRS
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« Reply #4 on: August 10, 2014, 02:40:14 AM »

Thank you fukenbroken  Grin

this is my learning file. Its flashed currently and works fairly well
Logged
Dave87VRS
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« Reply #5 on: August 10, 2014, 08:52:00 AM »

I wouldnt recommend anyone to load this file though changes have been made that might not suit other vehicles
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)