Pages: 1 ... 5 6 [7]
Author Topic: WinOLS for a mk4 AUM Golf GTI - 06A906032HJ 0002 (Questions)  (Read 73151 times)
dgpb
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 176


« Reply #90 on: January 09, 2015, 06:34:35 PM »

Generally it means the MAF isn't scaled quite right.

 Shocked

My MAF sensor/meter and housing are stock (what's more, the whole engine is stock), every thing related to MAF scaling in my flash is stock too, and readings seems to have sense.
Logged
dgpb
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 176


« Reply #91 on: June 10, 2015, 01:50:52 PM »

Well, it's been a long time (5 months) since I last touched my ecu. I was on degree exams... One of them "Industrial Automation", which I passed.

Now I know much better PIDs.

So nyet, I realyzed what you meant with I-Limit (At least I think so, let's try it)

You tought I was getting steady state error, which is corrected through Integral action. As a real system does not produce infinite outputs, My PID is limited to X, Y, Z (for P, I, D) and Y "I-limit" was not eough to correct that error. That's why for an input of 95% I was getting less.

Although I understand your point I consider that the problem was that cell of DRL... Putting a 95% there I fixed it. And makes sense that if the output from IMX goes to a correction in DRL is this last one which has "the last word"


What do you think?
Logged
dgpb
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 176


« Reply #92 on: June 11, 2015, 01:33:37 PM »

I'm pretty sure that means you still don't understand LDRL Sad

I'm not sure how to explain it to you Sad

if you're already at 95, you can't go any higher. 95 is the absolute max. Period.

And here I understand that this linearization is to get in real beheavour a 95% DC. But Im not sure why to linearizate as stock... maybe a way of protection against high levels of boost?

I mean, the n75 and the wastegate actuator are the same in other 20vt and DRL is different in 032 HN AUQ for example... don't remember if 86% or 95 in that same cell (where 032 HJ AUM is 79%).
« Last Edit: June 11, 2015, 01:36:43 PM by diegogpb » Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #93 on: June 11, 2015, 10:04:44 PM »

But Im not sure why to linearizate as stock... maybe a way of protection against high levels of boost?

No. Not even remotely close.

http://s4wiki.com/wiki/Tuning#Calibrating_KFLDRL
http://nefariousmotorsports.com/forum/index.php?topic=517.msg4028#msg4028
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dgpb
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 176


« Reply #94 on: June 12, 2015, 05:45:56 AM »


Then? Why? (Having in mind as I said, that AUQ is the same engine and 032HN has different DRL from AUM's 032HJ)

Edit: Sorry, I didn't see you links. Im gonna read them.
Logged
Pages: 1 ... 5 6 [7]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)