Pages: [1]
Author Topic: me3.8.3 1.8t AGU unknown ecu mods?  (Read 4234 times)
itsalive13
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 23


« on: August 25, 2014, 12:26:58 PM »

Hi, bought this ecu under the impression was standard, so I could disable imobiliser and use. 06a906018r.
Cracked it open and found this. Chip has been raised, another small one sat under it. Also noticed the 24c02 had different markings on top, not sure if relevant.
Any info on what im looking at would be great.
Thanks
Dale
Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 826


« Reply #1 on: August 25, 2014, 05:51:47 PM »

That is a small encription board around flash eeprom. It is used to protect flash eeprom content to be read. Aabout markings on 24C02 top, what do you mean? 24C02 content seems to be good. Do you tested on bench?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)