hi,
i would like to increase my stationairy RPM to +- 1000rpm
cause i have racing engine-mounts and singelmass flywheel and i have vibration at lower (stock rpm)
with the adaptation channel 1 via vcds i cant get high enough

So would it be possible to adapt the rpm in de sw??? so it is 1000Rpm at stock adaptation value.

Maybe for some of you a simple and easy question ( i hoop)
But i cant seem to find it in the damos i have or in the FR

This is about a audi TT 1.8T AUM engine sw 8n0906018AP 03

So if someone could help me or point me in the correct direction thanks.

thaks looks okey

But i have a few nllm  like nllm_0_A  and nllm_1_A

Probably have to change al 4 maps???

okey thank you verry much
will define in in my maps and wil give it a try

unissettings thats the same as the adaption of channel 1? i did that before with my vas-pc or with vcds
But you cant get higher than adaption value 134 and that about 850 rpm.

Did the change in the SW ant now it idles as i wanted it at 1000rpm