Pages: 1 2 3 [4] 5
Author Topic: P0602/P1681 Control Module Programming Not Finished - Workaround for ME7.1.1/7.5  (Read 10850 times)
aef
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 1162


« Reply #45 on: June 16, 2017, 05:21:27 AM »

http://nefariousmotorsports.com/forum/index.php?topic=6719.0
Logged
Marty
Hero Member
*****

Karma: +141/-100
Offline Offline

Posts: 1416


« Reply #46 on: June 16, 2017, 06:22:49 AM »



 OR download a non modified file and write that. 1 or 2 1.8t software versions have bugs
Logged

tinytim
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 15


« Reply #47 on: June 19, 2017, 04:29:51 AM »

I've tried all suggestions, 4 different bin files. Anything that is modified flashes fine without issue. Issue is only when I try to load a non modified stock bin.
Logged

C5 A6 2.7t TIP
B5 A4 4.2 01a
tinytim
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 15


« Reply #48 on: June 19, 2017, 05:06:08 AM »


The hex string mentioned in that thread is not present in my 1.8t file
Logged

C5 A6 2.7t TIP
B5 A4 4.2 01a
aef
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 1162


« Reply #49 on: June 19, 2017, 06:22:01 AM »

attach your file pls
Logged
tinytim
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 15


« Reply #50 on: June 21, 2017, 04:31:02 AM »

attach your file pls

Uploaded, any help would be greatly appreciated. I've tried a few more stock files with same results. Car runs and drives but has CEL for above mentioned code. Everything else is fine with the car. 
Logged

C5 A6 2.7t TIP
B5 A4 4.2 01a
aef
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 1162


« Reply #51 on: June 21, 2017, 05:30:05 AM »

The hex string mentioned in that thread is not present in my 1.8t file

Thank you for wasting everyone's time.


Logged
tinytim
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 15


« Reply #52 on: June 21, 2017, 09:58:43 AM »

Thank you for wasting everyone's time.




Excuse me? Wasting time? I am still learning, I searched for that string and saw that but the rest did not match. I did not know that the same string as mentioned would be partial or in a different order. Lighten up man.

Either way I appreciate the help, minus the arrogance.
Logged

C5 A6 2.7t TIP
B5 A4 4.2 01a
nyet
Administrator
Hero Member
*****

Karma: +443/-62
Offline Offline

Posts: 10107


WWW
« Reply #53 on: June 21, 2017, 11:26:49 AM »

Whoa whoa, he's 100% right.

The original post did not make it at all clear that variant was possible.

Merged with original topic so this information does not get lost.
« Last Edit: June 21, 2017, 11:28:32 AM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
aef
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 1162


« Reply #54 on: June 21, 2017, 10:37:40 PM »

I searched for that string and saw that but the rest did not match. I did not know that the same string as mentioned would be partial or in a different order.

hehe, I think the thread DID make it clear because of the ?? wildcards.
Only thing i did was to search this for you and i am still learning too.

Please report back if this solved your problem with the dtc.
Logged
brodway2800
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14



Anyone could help with My ME 7.1.1 ? it's a 022906032CA ecu. Have the same problem and tried various things but none of tchem helped. Also when im trying to upload file to its flash i got some kind of loop:

Wake ecu
switch to high speed
clean ecu data

and that goes over and over again.
Only possibility to upload the file is Boot Mode, but with that still got the fault Programing not finished.

I have tried couple tools: FgTech and MPPS and nothing, anyone had such a problem before ?
Logged
gt-innovation
Sr. Member
****

Karma: +45/-35
Offline Offline

Posts: 396



Use a proper tool or boot mode . CMD has no issues...Neither should the original mpps which i suppose you are using.
Logged
brodway2800
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14



Yes its the stock software im uploading but anyways it wont start no matter what i do.
Logged
Marty
Hero Member
*****

Karma: +141/-100
Offline Offline

Posts: 1416



Yes its the stock software im uploading but anyways it wont start no matter what i do.
Then do something else. Eeprom error? Are you sure theres no hardware issues? Are you sure the ecu isnt partly bad
Logged

brodway2800
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14



Since i have the car it was impossible to upload files to the ecu. Always there was an error after erasing flash - so i had to go into a boot mode and then it was fine.
Did some modifications to the software and tried again upload it and it eventually went thru and after that it says Programming not finished, checksums are fine,
have a look into my epprom maybe there is something not as it should after flashing. Also attached the original ecu file which was in before any mods/

it is 800BB chip, and using NEF tool to read it slowly doesnt help at all, tried several Times with different read speeds. As well i have tried to flash it with NEF tool but no luck, somehow the ecu doesnt let the flash to be rased in NEF flasher it just fails, then it goes to speed negotiation and it fails again and thats it. Not sure what else i can try.

I dont even know how to check eeprom if it has been modified or not. I would be thankfull if someone could have a look in it
« Last Edit: January 16, 2018, 09:03:19 AM by brodway2800 » Logged
Pages: 1 2 3 [4] 5
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)