Looking for .xdf file for my ecu. Not sure if a different .xdf will work or not.

Sweet! I will take a look over there. On the nef flashing utility there is option for boot mode. I bricked my ecu, do I have to get gellato cable and short the pin? Im assuming I do but I did notice that option with nef flasher. I should unlug the big connector and short pin 24. Turn ignition on and unshort the pin aftet a couple seconds then use gellato software to flash the original bin? I already tried cutting power. Thanks man ur a massive help

MAP FOUND: KFZWOP 11x16 @ 0x15602
MAP FOUND: KFZWOP2 11x16 @ 0x156B2
MAP FOUND: KFZW 12x16 @ 0x15E4E
MAP FOUND: KFZW2 12x16 @ 0x15F0E
MAP FOUND: KFMIRL 12x16 @ 0x1198A
MAP FOUND: KFMIOP 11x16 @ 0x13196
MAP FOUND: KFLBTS 16x12 @ 0x1906C
MAP FOUND: LAMFA 6x15 @ 0x1C05C
MAP FOUND: KFLDIMX 8x16 @ 0x1D21A
MAP FOUND: KFLDHBN 8x8 @ 0x196A4
MAP FOUND: KFDLULS 8x8 @ 0x19793
MAP FOUND: KFLDRL 10x16 @ 0x1D36C
MAP FOUND: LDRXN 16x1 @ 0x1D8B2
MAP FOUND: LDRXNZK 16x1 @ 0x1D8F4
MAP FOUND: VNMX 1x1 @ 0x15772
MAP FOUND: NMAX 1x1 @ 0x16D5C
MAP FOUND: DNMAXH 1x1 @ 0x13314
MAP FOUND: ITNMXH 1x1 @ 0x13318
MAP FOUND: NMAXOG 1x1 @ 0x13320
MAP FOUND: TMOTNMX 1x1 @ 0x13324
MAP FOUND: TNMXH 1x1 @ 0x13328
MAP FOUND: CWDLSAHK 1x1 @ 0x18638
MAP FOUND: CDHSH 1x1 @ 0x1819C
MAP FOUND: CDHSHE 1x1 @ 0x1819D
MAP FOUND: CDSLS 1x1 @ 0x181AA
MAP FOUND: KRKTE 1x1 @ 0x1277A