Pages: [1]
Author Topic: Help bench flashing Me7.1.1 ECU  (Read 4279 times)
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« on: September 09, 2014, 08:32:33 AM »

I purchased a 2004 Audi Allroad 4Z7907551S ECU to do some test flashing with the NefMoto software to track down some issues people are having with 2004 ECUs. Since this ECU has an immobilizer it won't let me bench flash it over OBD. I don't have an instrument cluster to connect it to for the immobilizer, and I need to flash over OBD for testing. Is using boot mode to turn off the immobilizer in the 94050 eeprom the easiest thing to do to let me flash over OBD on the bench?
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #1 on: September 09, 2014, 09:14:13 AM »

Yep Smiley

Use argdub's tool to read the eeprom (in either bootmode or obd) http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=

Either flip the immo bits in a hex editor, or use my tool if its a standard immo3 512byte eeprom: http://nefariousmotorsports.com/forum/index.php?topic=6134.msg62200#msg62200

Write back to ecu using argdubs tool in boot mode.

Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #2 on: September 09, 2014, 09:20:11 AM »

7.1.1 is not 95040. might find a 5p08c3 chip though.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #3 on: September 09, 2014, 10:06:03 AM »

I purchased a 2004 Audi Allroad 4Z7907551S ECU to do some test flashing with the NefMoto software to track down some issues people are having with 2004 ECUs. Since this ECU has an immobilizer it won't let me bench flash it over OBD. I don't have an instrument cluster to connect it to for the immobilizer, and I need to flash over OBD for testing. Is using boot mode to turn off the immobilizer in the 94050 eeprom the easiest thing to do to let me flash over OBD on the bench?

1B669

24--->00

Should disable the need to authenticate the immobilizer for flashing.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)