Pages: [1] 2 3 ... 7
Author Topic: 1.8t: electronic SUV via N249 output  (Read 124263 times)
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« on: September 10, 2014, 11:10:28 PM »

Hi,

there is a conversation at the moment in german board(s).
The basic idea is to use the N249 wires, a TFSI diverter valve and an adaptor like 06F145751 to have a electric diverter valve without vacuum lines.
Its faster and better and bla....okay!

one guy is running this for year(s).
the ecu / driver behind N249 is capable to support the power of the tfsi/med9 diverter falve.
i had a look into LDUVST and couldnt find any downsides.

BUT i am not that familiar with the diagrams in the FR like you are

so the question is, are there any hidden hitch or is this working on me7.5?

regards


« Last Edit: September 11, 2014, 06:35:03 AM by aef » Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401


« Reply #1 on: September 11, 2014, 05:55:14 AM »

Whats a electronic SUV?

Please excuse the nooby question lol
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #2 on: September 11, 2014, 06:33:53 AM »

Sorry... SUV is german short form for Schubumluftventil which is diverter valve  Embarrassed
Logged
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #3 on: October 07, 2014, 07:57:41 PM »

I would like to do this. In fact I'd be the guinea pig. What is the part number for the TFSI valve?
Logged
A4Rich
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 116


« Reply #4 on: October 08, 2014, 08:56:59 PM »

I would like to do this as well, probably should replace my stock dv anyhow.

Good FR information about the N249 can be found here.
Logged
A4Rich
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 116


« Reply #5 on: October 17, 2014, 01:57:45 PM »

What is the part number for the TFSI valve?
Piston style - 06H 145 710 D
Diaphragm Style - 06F 145 710 G
See this thread for more information on the valve, Click.
Logged
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #6 on: November 01, 2014, 06:44:13 AM »

I ordered the valve off ebay...... should be here in a few weeks.

http://www.ebay.ca/itm/281325968374?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

I'm now looking for a good price on the adaptor. I'll update when I find a reasonable source.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #7 on: November 02, 2014, 02:33:44 AM »

Is this a fake item?

The adaptor 06F145751 is around 63€ in germany... thats crazy.

there is one in used condition in ebay germany right now..

http://www.ebay.de/itm/Seat-Leon-Cupra-R-1P-TFSI-CDL-Motor-Abschaltventil-Schubumluftventil-06H145710D-/141378262613?pt=DE_Autoteile&hash=item20eacd1655
Logged
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #8 on: November 02, 2014, 06:53:26 AM »

Found one for a reasonable price, and shipping. Most all of the performance parts suppliers in the US want between $25-$50 to ship a small, lightweight parcel to Canada. These companies won't be getting my business. Get real on the shipping charges, or don't offer shipping to Canada.  Angry

For a shiny, brand new adapter Grin:

http://www.uspmotorsports.com/Spulen-Diverter-Valve-Relocation-Adapter-2.0T-FSI-TSI.html

Can't wait to get this on the car. My logs are showing the effects of using manifold pressure to activate my stock diverter valve instead of ECU control via N249. I plan to use this new valve setup close to throttle valve inlet when I finally get around to installing my front mount IC. This way cooled air gets recirculated instead of hot. In the meantime, it's going in the stock TIP location. Will update with pictures when installed.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #9 on: November 02, 2014, 06:57:11 AM »

FWIW, if you need some stuff sent to Canadia, just LMK. Happy to accept/rebox/post it to you.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #10 on: November 02, 2014, 07:21:54 AM »

FWIW, if you need some stuff sent to Canadia, just LMK. Happy to accept/rebox/post it to you.
Once again, you're a prince.Grin
Logged
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #11 on: November 02, 2014, 12:12:49 PM »

My next question is what current does the new diverter valve draw vs the stock n249. I'll have to measure resistance of the new valve coil when it arrives. If the new valve is very low impedance, I might rig up a relay.
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #12 on: November 02, 2014, 12:37:33 PM »

A relay's gonna take days to respond compared to the ECU..
Logged
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #13 on: November 02, 2014, 03:18:41 PM »

A relay's gonna take days to respond compared to the ECU..
You reckon the "ON" time is fast and short enough that an impedance mismatch won't bother the driver circuit?
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #14 on: November 02, 2014, 03:19:35 PM »

no need for a relay. just wire it direkt to the ecu.

there is one guy over here driving this setup for months.
Logged
Pages: [1] 2 3 ... 7
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)