me7.5 checksum problems

Pages: [1]

« previous next »

Author

Topic: me7.5 checksum problems (Read 4884 times)

manzheka

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	me7.5 checksum problems « on: September 17, 2014, 06:55:08 AM »

hello guys! I'm a newbie on your forum, so I do not know all. I was faced with the following problem. my car Jetta MK4 Gli, 1,8t 180hp, ecu 06a906032sl. i have two ecu, on the first after a one-time trip more than 40 miles it will not start again and problem solved after reflashing ecu, and the second don't run the engine two times streak. this problem solved with reconnecting battery teminal. I understand that it is not the correct checksum of eeprom, but don't know how solve my problem. I have a dump of eeprom from the first and the second ecu. so who can help me with my problem???


	Logged

turboat

Hero Member

Karma: +45/-3
Offline

Offline

Posts: 619

	Re: me7.5 checksum problems « Reply #1 on: September 17, 2014, 07:19:20 AM »

Checksums look ok and you dont have the death code set. Suspect your issue is a checksum error with the flash, read it off using nef and lets have a look.

$ python eepromtool.py jeta\ eeprom\ 2.bin Read in 512bytes EEPROM Status: - Version: Immo3 - VIN: 9BWDE61J954032125 (VW Brazil 2005 - Golf and Bora 4) - SKC: 01771 - Immobiliser: Off - Checksum: OK - Size: 512bytes - Cluster Code: 40 85 40 7F 38 4F A1 - P0601 DTC: not set - Immo ID: VWZ7Z0E1370656 - Softcoding ID: 7500 - Tuner Tag: - Flash Read/Write (successful): 0 - Flash Read/Write (attempts): 0 $ python eepromtool.py jeta\ eeprom\ 3.bin Read in 512bytes EEPROM Status: - Version: Immo3 - VIN: 9BWDE61J954032125 (VW Brazil 2005 - Golf and Bora 4) - SKC: 01771 - Immobiliser: Off - Checksum: OK - Size: 512bytes - Cluster Code: 40 85 40 7F 38 4F A1 - P0601 DTC: not set - Immo ID: VWZ7Z0E1370656 - Softcoding ID: 7500 - Tuner Tag: - Flash Read/Write (successful): 0 - Flash Read/Write (attempts): 0


	Logged

manzheka

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: me7.5 checksum problems « Reply #2 on: September 18, 2014, 04:21:01 AM »

Here files from the first and second ECU. please see it!


	Logged

manzheka

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: me7.5 checksum problems « Reply #3 on: September 18, 2014, 04:57:35 AM »

eeprom1 is immo_off witch i have found on forum

eeprom1
EEPROM Status:
- VIN: 9BWDE61J954032125 (VW Brazil 2005 - Golf and Bora 4)
- SKC: 01771
- Immobiliser: Off
- Checksum: OK
- Size: 512bytes
- Cluster Code: 40 85 40 7F 38 4F
- P0601 DTC: not set
- Immo ID: VWZ7Z0E1370656
- Softcoding ID: 7500

the second eeprom file is my factory. both ecu flash is not mine.
eeprom2
EEPROM Status:
- VIN: 3VWSE69M95M069337 (VW Mexico 2005)
- SKC: 06981
- Immobiliser: On
- Checksum: OK
- Size: 512bytes
- Cluster Code: 08 83 10 D1 40 4B
- P0601 DTC: not set
- Immo ID: VWZ7Z0D0380362
- Softcoding ID: 7550


	Logged

manzheka

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: me7.5 checksum problems « Reply #4 on: September 18, 2014, 07:02:51 AM »

please help! the third month I can not normally drive a car! Cry


	Logged

turboat

Hero Member

Karma: +45/-3
Offline

Offline

Posts: 619

	Re: me7.5 checksum problems « Reply #5 on: September 18, 2014, 08:11:02 AM »

What maps (flash) have you got on there? pull the flash off using nefmoto (see the getting started guide) and have a look with me7check.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 12:01:01 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search