Pages: 1 ... 45 46 [47] 48 49 ... 52
Author Topic: Nefmoto community project: Stage1 1.8t ME7.5 A4 (8E0909518AK-0003)  (Read 502432 times)
snuff
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 28


« Reply #690 on: June 29, 2018, 01:40:53 PM »

Hi everyone, I was logging my car and I noticed unusual "spikes" in the boost pressure .. In my point of view it happens because when I quit pushing gas and the throttle valve suddenly closes it it the pressure of air which is than let out through an blow-off valve.. Can someone confirm it is OK? Or do I have somehow faulty blow-off valve which doesn't respond as quickly as it should? Thanks.. (red line is desired boost and yellow actual.)
« Last Edit: June 29, 2018, 02:04:16 PM by snuff » Logged
joshk326
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3



« Reply #691 on: June 29, 2018, 02:06:50 PM »

I have a 2003 b6 Audi A4 1.8t and if I were to flash this right on my ecu without making any changes for now would it work?


Sent from my iPhone using Tapatalk
Logged

2003 Audi A4 1.8T
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #692 on: June 29, 2018, 02:28:33 PM »

Hi everyone, I was logging my car and I noticed unusual "spikes" in the boost pressure .. In my point of view it happens because when I quit pushing gas and the throttle valve suddenly closes it it the pressure of air which is than let out through an blow-off valve.. Can someone confirm it is OK? Or do I have somehow faulty blow-off valve which doesn't respond as quickly as it should? Thanks.. (red line is desired boost and yellow actual.)

That does not look good. Definitely have them checked out.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #693 on: June 29, 2018, 08:38:04 PM »

Hi everyone, I was logging my car and I noticed unusual "spikes" in the boost pressure .. In my point of view it happens because when I quit pushing gas and the throttle valve suddenly closes it it the pressure of air which is than let out through an blow-off valve.. Can someone confirm it is OK? Or do I have somehow faulty blow-off valve which doesn't respond as quickly as it should? Thanks.. (red line is desired boost and yellow actual.)

Can you post the log?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
snuff
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 28


« Reply #694 on: June 29, 2018, 11:53:53 PM »

thanks log are here..

I found out that on my car was modified software..LDRXN and LDRXNZK and KFBLTS were changed.. The log from 173615.csv is from that software.

After that I changed LDRXN and LDRXNZK to factory values (log 202134) and logged again.
« Last Edit: July 03, 2018, 09:11:33 AM by snuff » Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #695 on: March 12, 2019, 05:47:56 AM »

On this stock ECU at first post the TABGBTS is 850, but as I can see older ECU-s  on passat ,TT etc. (starting index 4B0 or 06A) have TABGBTS 400-500. Why is it so?
Logged
prj
Hero Member
*****

Karma: +903/-420
Online Online

Posts: 5789


« Reply #696 on: March 13, 2019, 11:44:08 AM »

On this stock ECU at first post the TABGBTS is 850, but as I can see older ECU-s  on passat ,TT etc. (starting index 4B0 or 06A) have TABGBTS 400-500. Why is it so?
Because they ran all the time on the BTS map.
As focus shifted away from engine/turbocharger longevity and more towards minimum consumption it was made so that the car runs lambda 1 all the time unless absolutely neccessary to enrich for component protection. This results in higher EGT's through the lifecycle of the engine, but less fuel consumption.

Apart from WOT where lambda was regulated to lean best torque (0.9) to get the best response, especially off-boost.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #697 on: March 15, 2019, 12:34:47 AM »

Thank you,
One more thing, B6 have different fuel sistem from B5.
Soo does B6 have some maps about fuels injection/and manifold pressure?
Logged
316LV
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 150


« Reply #698 on: March 17, 2019, 08:58:04 AM »

Thank you,
One more thing, B6 have different fuel sistem from B5.
Soo does B6 have some maps about fuels injection/and manifold pressure?

Yes. FRLFSDP.

See this thread: http://nefariousmotorsports.com/forum/index.php?topic=460.0
Logged

Go ahead and give me negative karma... I don't care if you like what I post princess.
snuff
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 28


« Reply #699 on: May 14, 2019, 11:36:20 PM »

That does not look good. Definitely have them checked out.

Hi, after some time, these spikes were there because of DV was not functional.
Anyway thanks to this forum I managed to modify my AWT 1.8T without problems so thank you guys, a lot of amazing info is there.
« Last Edit: December 18, 2019, 12:26:47 AM by snuff » Logged
snuff
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 28


« Reply #700 on: June 04, 2019, 09:18:55 AM »

Hi, could please anyone check my log? I'm trying to calculate IDC (last row in attached document) and it looks like, my injectors are going on 98 percent of its capacity? Am am calculating it right please? Thanks..

I calculate it as IPW * RPM / 1200
« Last Edit: June 04, 2019, 09:27:30 AM by snuff » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #701 on: June 04, 2019, 10:10:52 AM »

Hi, could please anyone check my log? I'm trying to calculate IDC (last row in attached document) and it looks like, my injectors are going on 98 percent of its capacity? Am am calculating it right please? Thanks..

I calculate it as IPW * RPM / 1200

ECUxPlot will do this for you.

Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #702 on: June 04, 2019, 10:12:19 AM »

And your WGDC is maxed too.

Not good.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #703 on: June 04, 2019, 10:14:00 AM »

Hi, could please anyone check my log? I'm trying to calculate IDC (last row in attached document) and it looks like, my injectors are going on 98 percent of its capacity? Am am calculating it right please? Thanks..

I calculate it as IPW * RPM / 1200

You dont need to calculate it , as EcuXplot knows ,you are running 100+ idc. AFR maxes at 10.7 , and your requested is still going below 10, even 9.9 gotta fix that + what nyet said.

Also whats wrong with the MAF reading off throttle , do you have surge or something ?
« Last Edit: June 04, 2019, 10:15:49 AM by Blazius » Logged
snuff
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 28


« Reply #704 on: June 05, 2019, 01:44:35 AM »

And your WGDC is maxed too.

Not good.

Yes I know, thank you. That is not map I am running on..It was done only for testing purposes..I need to use downpipe and I think my wgdc will be alright than.

MAF off the throttle was bacause of mailfuntional DV.
What I'm worried about is that my turbo lasts too long to spool until desired boost pressure. It can reach desired boost only in around 3500 rpm... Too late. :/
« Last Edit: December 18, 2019, 12:28:13 AM by snuff » Logged
Pages: 1 ... 45 46 [47] 48 49 ... 52
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)