Pages: 1 [2] 3 4 ... 52
Author Topic: Nefmoto community project: Stage1 1.8t ME7.5 A4 (8E0909518AK-0003)  (Read 502398 times)
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #15 on: October 05, 2014, 07:42:03 AM »

Well I've been working away, and now I realize I've made a balls-up. I bought the MTX tunerpro plugin when I read my original file, and the license is only good for that file or its variants. I can't actually correct the checksums on the 518AK file once I've modified it! I went with the 518ak file because it was hard to find a decent xdf for my original.

I tried me7sum, but it failed. Now I'm faced with the choice of starting over with my original file, or buy the "commercial" license from MTX..... Angry

Please post your bin.

The latest version of me7sum should work.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #16 on: October 05, 2014, 07:47:53 AM »

Strangely enough, I have an "alternate" choice xdf and bin for 8e0909518ak that i can correct with my MTX plugin, and will run on my car. I chose to use the .bin/xdf in the original post because it came recommended to me. Not sure where to go with this, If I use the "alternate" 518ak xdf, it will need some streamlining. Too many maps for stage 1 and a little confusing for newbs Embarrassed. Here's the "alternate" files, I found them here on Nef...

I've had issues with this file.  I couldn't get LAMFA fueling to work on it.  Now I am instead using the file originally posted in this thread instead.  Waiting on logs from this file, so I can't yet confirm that this one works any better, though it should.

I have the same RSA signature error on both of these 518AK files when using the MTX tuner pro plugin.  I'd be weary of flashing these MTX checksumed files to your car if I were you.
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #17 on: October 05, 2014, 08:45:16 AM »

ME7Sum now works with this file, and other ME7.5 files.  BIG Ups Nyet!
Logged
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #18 on: October 05, 2014, 09:57:12 AM »

Hey all, turns out I must have mixed up my reference file for the MTX plugin or some other housekeeping error in my bin file directory. I've since cleaned things up and MTX is working for the community project file again!


I'm going to attach the modified stage 1 file* for nyet to check for compatibility with me7sum etc. (all I've changed are the LAMFA values and axes, and a new ldrxn curve).

I HAVE NOT TESTED THIS FILE!! FLASH AT OWN RISK

Here's a screen shot of me7check giving the OK on the corrected file as well.
*I have removed this .bin file because it had RSA errors*


I'm going to re-do my stock file logs (what parameters to log?) and then flash over this one and log again, probably tomorrow.

« Last Edit: October 05, 2014, 11:26:27 AM by thelastleroy » Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #19 on: October 05, 2014, 10:45:17 AM »

For the sake of the community project, I would suggest that you use ME7Sum.  Setup tunerpro so that it you can set a keyboard shortcut to correct or validate checksums with me7sum.

This is free to everyone and everyone can get it now.  MTX costs money, hasn't even worked for me, and it takes time to get the license file from them. 
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #20 on: October 05, 2014, 10:48:35 AM »

You are using an old version of ME7Check!

This is what I get with the newest ME7Check with your file

Code:
ME7Check v1.12 (c) mki, 06/2004-05/2012
Checking file Z:\ECU Tuning\new\518AKv1.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 06.02
-> EPK = 40/1/ME7.5/5/4012.31//24E/Dst03o/110403//
-> Contents of ECUID data table:
   - '0261208230'         (SSECUHN)         
   - '1037368072'         (SSECUSN)         
   - '8E0909518AK '       (VAG part number)
   - '0003'               (VAG sw number)   
   - '1.8L R4/5VT    '    (engine id)       
-> Contents of ECUID data table:
   - 'HW_MAN004'                           


RSA signature failure found
-> Found 1 error!!!   *******************************


I wouldn't flash this file.
« Last Edit: October 05, 2014, 11:08:41 AM by SB_GLI » Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #21 on: October 05, 2014, 11:08:06 AM »

File corrected with ME7Sum

Code:
==============================================================================
me7check v1.12 (c) mki, 06/2004-05/2012
Checking file Z:\ECUTuning\new\518AKv1checksum.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 06.02
-> EPK = 40/1/ME7.5/5/4012.31//24E/Dst03o/110403//
-> Contents of ECUID data table:
   - '0261208230'         (SSECUHN)
   - '1037368072'         (SSECUSN)
   - '8E0909518AK '       (VAG part number)
   - '0003'               (VAG sw number)
   - '1.8L R4/5VT    '    (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'


-> No errors found. File is OK.   *********************
Logged
AudiMan85
Full Member
***

Karma: +21/-7
Offline Offline

Posts: 215



WWW
« Reply #22 on: October 05, 2014, 11:21:21 AM »

If you check my past posts I have showed how to setup me7sum for keyboard shortcuts.

Also the MTX plugin, we're you trying with the ME7 plugin? Or the ME7 2002+? I was referring to the use of the 2002+ one for my friends 518AK file. I haven't made a file yet for him cause he didn't wanna buy plugin. But now that's I have enough of a xdf to work off of I'll give it a try.

Also, have you posted the v2 xdf from the above screenshot? I'd like the one with psi vs. Load it just makes more sense to me.

Thanks
Logged

"Ride like I got a horse stable under my hood" ~ The Game - Too Much
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #23 on: October 05, 2014, 11:42:32 AM »

I'm going to look into using me7sum exclusively, for ease of use in this project. I've also removed the .bin file I posted earlier that had errors.

Here's the v2 xdf I"m using
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #24 on: October 05, 2014, 01:16:28 PM »

Big thank you to everyone helping with testing. I really appreciate it.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #25 on: October 05, 2014, 03:29:16 PM »

I'd like to incorporate the "pushbutton" emission and cat delete niceties from the 2.7 thread. How is this done? Ddillenger secret?
« Last Edit: October 06, 2014, 02:44:51 AM by thelastleroy » Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #26 on: October 05, 2014, 04:30:30 PM »

I'd like to incorporate the "pushbutton" emission and cat delete niceties from the 2.7 thread. How is this done? Ddillenger secret?

Copy the parameters from my xdf, paste them into yours, change the addresss.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
AudiMan85
Full Member
***

Karma: +21/-7
Offline Offline

Posts: 215



WWW
« Reply #27 on: October 05, 2014, 05:57:39 PM »

DD, I wanna know who had the nerve to give you negative karma?

I mean like who would do that you are one of the top people who respond and give advice and knowledge.
Logged

"Ride like I got a horse stable under my hood" ~ The Game - Too Much
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #28 on: October 06, 2014, 05:22:03 PM »

If you check my past posts I have showed how to setup me7sum for keyboard shortcuts.

AudiMan85 - Thanks for this. I've got the shortcuts up and running in Tunerpro. Very slick, and so easy. Is it possible to output the file as the same name instead of "fixed.bin"?

I flashed the file to my car today and went for a 10 minute city/highway drive. Feels pretty good. Real car-running proof that me7sum does work for me7.5! I'm going to log when the weather is better. Is there a standard list of log parameters for something like this? I want to have all the info available.

From an educational standpoint, I'd like to ask someone to please explain the changes we've made in the LAMFA axis for pedal percentage. Does this bring LAMFA map in sooner than normal (starting at 50% now) in order to control the fuel delivery with LAMFA instead of another map? I know someone is going to say "go read FR" but lets put it into laymans terms for the sake of this thread.

Thanks again to all who have been helping me work this out! Grin
Logged
AudiMan85
Full Member
***

Karma: +21/-7
Offline Offline

Posts: 215



WWW
« Reply #29 on: October 06, 2014, 09:39:23 PM »

If maybe I had a user manual for TunerPro I could tell you the how to, the only way I have it setup up is with the examples the program gives you on the setup of the extract tool. I have no clue what command would produce a file output that's the same, but I suggest one with some label as to the file being fixed. I have the MTX plug-in also and it corrects it and outputs the file with the same name. Sometimes it can be a problem if you don't check it 1st and flash it. I like just the word fixed just so I know and then I label it xxxxxxxxxx_fixed.bin just to be on the safe side.
Logged

"Ride like I got a horse stable under my hood" ~ The Game - Too Much
Pages: 1 [2] 3 4 ... 52
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 18 queries. (Pretty URLs adds 0s, 0q)