NefMoto > Technical > Tuning > Me interpolation in cells
Pages: [1]
« previous next »
Author Topic: Me interpolation in cells  (Read 4829 times)
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« on: October 04, 2014, 11:47:13 AM »
How does the Me7 in 2.7t picks its values in cells.
Ie:

Load vs timing.

We have 10deg at 180 cell load, 8.5 deg at 200cell load both at 4000rpm.
Logs are showing 190ish load at 4000rpm
Does Me7 picks a value from 180 or 200 load cell or interpoalate something in-between??
Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #1 on: October 04, 2014, 12:54:01 PM »
http://nefariousmotorsports.com/forum/index.php?topic=5525.msg58989#msg58989
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425
« Reply #2 on: October 04, 2014, 02:56:53 PM »
Quote from: Mocke on October 04, 2014, 11:47:13 AM
How does the Me7 in 2.7t picks its values in cells.
Ie:

Load vs timing.

We have 10deg at 180 cell load, 8.5 deg at 200cell load both at 4000rpm.
Logs are showing 190ish load at 4000rpm
Does Me7 picks a value from 180 or 200 load cell or interpoalate something in-between??

Thats what exactly me7 does  Wink
((200-190) * (10-8.5)) / (200-180) = 0.75
10 - 0.75 = 9.25deg at 190 load
« Last Edit: October 04, 2014, 03:03:53 PM by terminator » Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #3 on: October 05, 2014, 12:25:33 AM »
Easy peasy Wink

Thanx boys!!!
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #4 on: October 05, 2014, 01:04:29 PM »
One more thing.

We have two ignition timing maps. Based on cam switchover Me picks values.
kfzw2 uses up to 5500rpm in my case. What happes with values in kfzw2 that are not used, ie after 5500rpm?? Could we have any value there we want if its not used??
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #5 on: October 05, 2014, 01:44:17 PM »
Quote from: Mocke on October 05, 2014, 01:04:29 PM
One more thing.

We have two ignition timing maps. Based on cam switchover Me picks values.
kfzw2 uses up to 5500rpm in my case. What happes with values in kfzw2 that are not used, ie after 5500rpm?? Could we have any value there we want if its not used??

Best way to tune these maps is to disable cam switching and run logs. Keep cams retarded, run logs. Tune timing throughout entire table. Then, keep cams advanced, run logs. Tune timing. When you are done, enable cam switching again!
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #6 on: October 07, 2014, 12:55:18 AM »
I am thinking in a normal engine function, cams are never retarded. They are always switching. So what would be the benefits of doing as you described?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 10:02:40 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)