Pages: [1]
Author Topic: Cheap Chinese VAG TACHO 2.5 and ept.  (Read 6378 times)
s8s4vw
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« on: October 16, 2014, 05:00:37 PM »

I was playing around with my VAG TACHO 2.5 USB cable to retrieve my SKC. After many failed attempts I thought to run Tacho 3.01 and the cable stopped working.
The chip is a FT245BL. Can someone please upload the ept file so I can try to revive it?
Thanks.
Logged
Tigerimtank
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18



« Reply #1 on: October 18, 2014, 03:37:41 PM »

My USB 2.5 Cable has an ohter Chip. Here
Logged
Tigerimtank
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18



« Reply #2 on: October 18, 2014, 03:41:10 PM »

Here The ept from 245R Chip USB 5.0
Logged
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #3 on: October 19, 2014, 04:14:49 AM »

What are you trying read the skc from? Tacho clones are usually a pos. commander/vageepromtool/argdub's tool are nicer if it's 7.1/7.5
Logged
s8s4vw
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #4 on: October 19, 2014, 05:17:09 AM »

Was trying to read IMMO 2 box 6H0 from a 2000 VW Cabrio. That can not be done over OBD II, but I thought to give it a try with 3.01 and then the Cable got ruined.
Logged
s8s4vw
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #5 on: October 19, 2014, 07:05:57 AM »

No dice
Logged
flamy
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 56


« Reply #6 on: February 07, 2023, 03:18:52 PM »

Found something useful in another forum. Helped fixing my VAG Tacho 2.5 cable.
Used MProg 3.5 to flash *.EPT to downgrade to v2.2 and updated afterwards with the *.EXE file.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.08 seconds with 17 queries. (Pretty URLs adds 0.003s, 0q)