Pages: [1]
Author Topic: VAG 2.5TDI AKE 180HP restriction  (Read 3581 times)
chli1976
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25


« on: October 27, 2014, 10:38:22 PM »

I have made two Audi with AKE engine.
Both of them have restriction in injection pump ecu.
One of then over the hole engine speed the other one only until 3000 rpm.

Where can i get a injection pump ecu without restriction
Or is it possible to flash this ecu.

When you order a new injection pump ecu, there are no data on this ecu
People who repair VP44 can flash this ecu. Can they also disable restriction ?
Logged
Lambda1
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #1 on: January 03, 2023, 02:45:08 AM »

You be right there is a restriction in the pump. You can upgrade the pump.
The max. (if I remember correctly was 52 or 54mg/strk). You can read the pump and flash it... you "just" need to find the voltage map inside and delimit,chks...
Logged
prj
Hero Member
*****

Karma: +906/-420
Offline Offline

Posts: 5790


« Reply #2 on: January 03, 2023, 04:05:47 AM »

No idea which tools flash it or if it's the good old manual method.

But the whole "limit" is because the IQ to voltage conversion is done in the pump.
So if you can not extend that map, there's your limit.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)