Overrun Flames, Gargle, Pop

Pages: 1 ... 29 30 [31]

« previous next »

Author

Topic: Overrun Flames, Gargle, Pop (Read 105725 times)

pablofrtdi

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	Re: Overrun Flames, Gargle, Pop « Reply #450 on: February 06, 2019, 05:44:28 AM »

Quote from: slklite on February 06, 2019, 04:11:40 AM

Hello guys, I have successfully implemented this on a 1.8T ME7, but now I have a MED9 on an audi TT 2.0 TFSI (car has turbo back exhaust system with 3inch downpipe amongst other mods...)

File is 8J0907115 (0261S02084) 386455

I have managed to find a few maps already.

I was wondering if someone could confirm what I found and help me find the rest ?

Here is what I found :

1CA0A9 : CWSAWE
1CD3B0 : KFZWOP
1D2340 : KFNWEGM_0_A
1D2368 : KFNWEGM_1_A
1D2390 : KFNWEGM_2_A
1D23B8 : KFTVSA
1D9D06 : KFZWMN

Thanks.

I have an Audi tt 2.0 TFSI.
I have changed:
CWSAWE
KFZWMN
KFTVSA
KFZW
KFZWOP

For me, the best is -17.5º on the two low loads columns from 4000rpm to 6000rpm and 0.8seg in KFTVSA.
I don't know why the ignition follows KFZWN from 4000rpm to 5000rpm but above 5000rpm, it follows other map (KFZW i think). This is the reason why i have modified kfzw too.


	Logged

Dejw0089

Jr. Member

Karma: +1/-4
Offline

Offline

Posts: 40

	Re: Overrun Flames, Gargle, Pop « Reply #451 on: February 06, 2019, 01:28:12 PM »

Quote from: pablofrtdi on February 06, 2019, 05:44:28 AM

What about KFZWMS KFZWMNHK KFZWMNST? I edited it too


	Logged

pablofrtdi

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	Re: Overrun Flames, Gargle, Pop « Reply #452 on: February 06, 2019, 02:31:38 PM »

Quote from: Dejw0089 on February 06, 2019, 01:28:12 PM

What about KFZWMS KFZWMNHK KFZWMNST? I edited it too

Yes mee to. Kfzwmnhk no because is for catalyst heating. mnst, and ms yes.
I have changed too only the first column (10% load) un kfzw and kfzwop --> -18° ignition.


« Last Edit: February 06, 2019, 02:39:22 PM by pablofrtdi »	Logged

andrax

Newbie

Karma: +0/-1
Offline

Offline

Posts: 9

	Re: Overrun Flames, Gargle, Pop « Reply #453 on: February 09, 2019, 04:07:58 PM »

Hello all,

I've been able to implement this function with different settings.

I am now trying to activate this function with cruise control or A/C. I tried the combination with DNWEG (engine speed fuel on with AC) but without success. Does anyone have tried something similar?

How can I implement this function or change some relevant factor to activate fuel on through an extern button?


	Logged

contrast

Full Member

Karma: +16/-1
Offline

Offline

Posts: 206

	Re: Overrun Flames, Gargle, Pop « Reply #454 on: February 10, 2019, 03:25:57 AM »

Custom code.


	Logged

slklite

Full Member

Karma: +0/-1
Offline

Offline

Posts: 73

	Re: Overrun Flames, Gargle, Pop « Reply #455 on: February 11, 2019, 03:39:24 AM »

Quote from: pablofrtdi on February 06, 2019, 05:44:28 AM

Hello, thank you for your reply ?

Could you post some screens of what you did ?

Thanks.


	Logged

andrax

Newbie

Karma: +0/-1
Offline

Offline

Posts: 9

	Re: Overrun Flames, Gargle, Pop « Reply #456 on: February 12, 2019, 02:40:01 PM »

Quote from: contrast on February 10, 2019, 03:25:57 AM

Custom code.

Thanks for the Input. I believe that´s something that I can´t do just following the Funktionsrahmen...

However this funktion is also connected with AC control. Is a solution changing the standard code anyhow possible?


	Logged

Kompiesto

Full Member

Karma: +2/-1
Offline

Offline

Posts: 51

	Re: Overrun Flames, Gargle, Pop « Reply #457 on: February 28, 2019, 11:41:04 AM »

Quote from: Kacza on February 05, 2019, 01:54:57 PM

Has anyone done this in ME7.1.1 3.2VR6?

Yep, I


	Logged

Pages: 1 ... 29 30 [31]

« previous next »

Jump to:

Navigation

Personal Tools

April 24, 2019, 01:26:50 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search