Pages: [1] 2 3 ... 43
Author Topic: Overrun Flames, Gargle, Pop  (Read 354562 times)
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« on: November 03, 2014, 02:04:19 PM »

I'm childish and I like things like this, so, how do you do it?

KFNWEGM - what is this?  It's Gear number and temp, but what are the units?  Target RPM?
KFTVSA?
KFVAKL?
KFZWMN?

Anything else?

The JCW Mini does it, how do we make ours do it?!
Logged
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #1 on: November 03, 2014, 03:56:42 PM »

KFNWEGM is like a threshold for fuelcut. When rpms drop, fuelcut is disabled from this value downwards. So if you want gargles and pops for the entire rpm range and all gears, set it higher than your rpm limit for example.

KFTVSA is the time in seconds i think before fuelcut is activated. But its active only when clutch is depressed. At least thats how ive seen it work on Volvos.

If you want bangs between shifts, lower KFZWMN in the lower load parts.

Sorry my english... (:
Logged
mbkr89
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 96


« Reply #2 on: November 04, 2014, 02:39:32 AM »



The JCW Mini does it, how do we make ours do it?!

I would also like to know
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: November 04, 2014, 10:21:38 AM »

I would also like to know

The post RIGHT ABOVE YOURS explains it.

[edit]
Summary:
CWSAWE : 1 (check FR this is ECU specific)
KFZWMN: -20 to -30
KFZWOP: first row -20 from original value
KFZW/KFZW2: match KFZWOP in changed areas
KFTVSA: duration (e.g) 2.55 sec
KFTVSAKAT: similar to above

Will add to s4 wiki time permitting.

See rest of thread for more details.
« Last Edit: June 19, 2020, 08:56:39 AM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
mbkr89
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 96


« Reply #4 on: November 04, 2014, 10:23:28 AM »

it doesn't work  Sad
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #5 on: November 04, 2014, 10:56:08 AM »

It is working, but it's not that aggressive.

I've flatted the whole minimum ignition angle to -96, and it gargles all day.

Once its really hot it seems to do it really well, but I think I need a louder backbox; as its pretty quiet.

It's better, though.
Logged
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #6 on: November 04, 2014, 11:57:17 AM »

-96 is too much imo. Try -35 to 40 or so. I guess this is vehicle dependant.
As for louder bigger bangs you need to keep in mind that for an explosion you need both fuel and air. Fuel is sorted since you disabled the fuelcut, but you need a way to have some fresh air in the exhaust pipe as well. Deacceleration maps for enrichment and and enleanment are the ones for that i think.
Logged
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #7 on: November 04, 2014, 11:59:36 AM »

I should add that stock catbacks and downpipes dont give the desired effect as good as a louder catback and catless downpipes
Logged
dayofthejackal
Jr. Member
**

Karma: +7/-0
Offline Offline

Posts: 37



« Reply #8 on: November 04, 2014, 12:05:52 PM »

I've got
KFTVSA set to 0.8 second between 1K- 2K and 2.8 seconds between 2K and 4K and set from 60c
KFTVSAKAT set to 1 second between 1K- 2K and 3 seconds between 2K and 4K
KFZWMN set to -48 between 1K and 3.25K

It pops/bangs loud and deep between gear changes, even if accelerating slowly and gargles on lift off, but never noticed flames yet, unlike over 4K the NLS kicks in and turns the exhaust into a flame thrower.


KFTVSA is the time in seconds i think before fuelcut is activated. But its active only when clutch is depressed. At least thats how ive seen it work on Volvos.


That explains why I don't get bangs when I just lift off in gear

There a EVO a keep seeing locally and it bangs and flames on gear change and lift off, it's loud.
Logged

DotJ Tuned - Look in HEX for DayoftheJackal
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #9 on: November 04, 2014, 12:10:07 PM »

Brought my KFZWMN back down so -50, will go flash and see how that is! Smiley

Logged
Lyonz
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 31


« Reply #10 on: November 04, 2014, 12:13:48 PM »

Perhaps with CWSAWE
http://nefariousmotorsports.com/forum/index.php?topic=277.0
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #11 on: November 04, 2014, 12:21:02 PM »

Changed mine already! Smiley
Logged
edgy
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 66


« Reply #12 on: November 04, 2014, 02:35:23 PM »

None of these maps are defined for the ecu I really want to do this to  Undecided
Logged

2002 S4 full stg 3
2001 S4 stg 2
2001 TT 225 stg 2
1988 80q 4.2
2005 A4 (the wife's)
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #13 on: November 04, 2014, 04:00:10 PM »

If you disable the fuel cutoff it should already work i guess? The retarded ignition during deccelaration will cause your noise. I had it all the time on my first gen lpg car, no fuel cut on those systems.
Logged

seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #14 on: November 04, 2014, 07:59:11 PM »

I hope you guys aren't doing this with cats in place... It's a fast track to catalyst melt down. Also a good way to explode a muffler... Ask me how I know! lol
Logged
Pages: [1] 2 3 ... 43
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.044 seconds with 17 queries. (Pretty URLs adds 0.006s, 0q)