Pages: [1]
Author Topic: Rear O2 delete not working  (Read 6833 times)
mitkoenchev
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 93


« on: November 13, 2014, 06:07:41 PM »

Hi, I tried to do the rear O2 delete as per s4wiki, but it seems I messed something up. I checked everything many times, so I'm either missing something or I didn't define some of my maps right. My ECU is ME7.5 8E0906018B 360990.

Any help would be appreciated.

I attach the file I'm working on along with original bin and the definition file (I'm sure it's not 100% right defined, since I'm still learning).
« Last Edit: November 13, 2014, 08:42:24 PM by mitkoenchev » Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: November 13, 2014, 06:27:54 PM »

Please post the original file.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
mitkoenchev
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 93


« Reply #2 on: November 13, 2014, 07:27:21 PM »

Please post the original file.

Corrected in the first post. Sorry, it seems I wasn't using my brain... it's 4am here Smiley
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #3 on: November 14, 2014, 07:04:18 AM »

is this me7.5?
Logged

mitkoenchev
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 93


« Reply #4 on: November 14, 2014, 07:16:36 AM »

is this me7.5?

Yes
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #5 on: November 14, 2014, 12:54:22 PM »

Only O2 sensors readliness is not passed?

http://nefariousmotorsports.com/forum/index.php?topic=615.msg64303#msg64303
« Last Edit: November 14, 2014, 12:57:25 PM by masterj » Logged

mitkoenchev
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 93


« Reply #6 on: November 14, 2014, 02:44:00 PM »


I always have an error code in VCDS and MIL is lit after 2nd start. I'll see what the error is (before my modifications to the maps, I had two rear O2 error codes in VCDS, now there's only one). Thanks for the link, I'll look into this and report here.
« Last Edit: November 14, 2014, 03:33:49 PM by mitkoenchev » Logged
mitkoenchev
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 93


« Reply #7 on: November 15, 2014, 08:45:39 AM »

I saw what I was missing - CWDLSAHK (0x18663) - Code word for probe aging after KAT - and I can't find it in my file.

It's not on the wiki, but I found this in my file: CWLSHA- Codeword: 02-sensors behind KAT aging DLSAHK% - Codewort fьr Lambdasonden hinter KAT Alterung in %DLSAHK and I set this to 0. I still need to see what is the error code in VCDS...
Logged
mitkoenchev
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 93


« Reply #8 on: November 16, 2014, 12:13:45 PM »

Maybe I found CWDLSAHK at 0x18657. Value is 05 there. I'm not sure though...
Logged
mitkoenchev
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 93


« Reply #9 on: November 20, 2014, 06:41:35 AM »

Maybe I found CWDLSAHK at 0x18657. Value is 05 there. I'm not sure though...

Didn't touch that, since I'm not sure its CWDLSAHK. I zeroed CWKONABG and CWLSHA. It also seemed I had defined ESCONF in the wrong place - I fixed that and I don't have any errors or MIL anymore. Readiness is not passed, but I don't need that here (I'll refer to masterj's post above if I need to get that pass). I hope there's no other negative effects to failed O2 readiness.

Thanks for that very useful info. Great thread on emissions.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)