Pages: [1]
Author Topic: ME7Logger has banks backwards!!???  (Read 5420 times)
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123


« on: November 22, 2014, 07:18:16 PM »

So My passengers side cam chain tensioner is clacking a lot. So i logged cam position bank 1 and 2. Funny The The graph for Cam bank 1 is normal and The graph for cam bank 2 has quite The issue. It seems like the side that is clacking is surely The side thats malfunctioning. Me7 must have The banks backwards. Anyone else stumble upon this??
« Last Edit: November 22, 2014, 10:54:42 PM by kingkhalilz » Logged
zillarob
Full Member
***

Karma: +13/-1
Offline Offline

Posts: 152


« Reply #1 on: November 23, 2014, 01:22:13 PM »

Unplug one and see what side quits switching.
Logged
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123


« Reply #2 on: November 23, 2014, 08:15:29 PM »

I'm scared to drive it. What sensor is for the cam angle?? its not the solenoid on the tensioner isn't it the cap sensor on the opposite side of the head??

I guess i gotta do what i gotta do.
Logged
zillarob
Full Member
***

Karma: +13/-1
Offline Offline

Posts: 152


« Reply #3 on: November 23, 2014, 08:55:52 PM »

Unplugging the sensor will work, should throw the open/short codes pretty much immediately.
Logged
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123


« Reply #4 on: November 24, 2014, 05:46:26 PM »

So i unplugged passenger side and re-logged. Of course cam angle bank 2 didn't get any readings. So if anyone cares this might save someone time THE BANKS FOR ME7 LOGGER CAN BE BACKWARDS!

So in my graph posted above the blue line is actually for bank 1 not bank 2. So the clacking sound is coming from the same side that is not functioning properly. I have e-mailed a guy to hopefully get one soon. I will Follow up with pics n shit.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)