Pages: [1]
Author Topic: Immo 4 digit pin  (Read 5133 times)
Ansonmusic
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 21


« on: December 06, 2014, 07:21:17 PM »

I'm trying to swap in a used ecu in my (04 gti 1.8t me7.5) and I was wondering if the immo pin is the same as the original ecu pin
Logged
10101011
Full Member
***

Karma: +10/-13
Offline Offline

Posts: 161



WWW
« Reply #1 on: December 08, 2014, 03:26:46 PM »

I'm trying to swap in a used ecu in my (04 gti 1.8t me7.5) and I was wondering if the immo pin is the same as the original ecu pin

sorry but no .. The used ECU has a diffrent pin
Logged

Poor quality lingers long after the price is forgotten ....
BDK
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 28


« Reply #2 on: December 08, 2014, 08:48:33 PM »

The old ecm (assuming it was properly adapted) will have a pin that is the pin for the car. This pin will match the instrument cluster/immobilizer. The new ecm will have its own pin.  Once adapted the new ecm will have the same pin as the car.



 
Logged
Ansonmusic
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 21


« Reply #3 on: December 11, 2014, 07:15:49 PM »

i got the pin for the new(used ecu) and the immo 3 login pin but when I get to new value input its says system not ok I swapped my last ecu with the same pin but this new(used) ecu is a no go I'm wondering if the ecu is bad its a 06A906032PS from a 03 beetle and my car is a awp 05 gti   
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #4 on: December 12, 2014, 08:47:04 AM »

I had this issue with some ECUs, had to manually copy the SKC, cluster code and immo ID from the old ecu into the new ECU.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)