Pages: [1]
Author Topic: RS4 MED9 MPC564 BDM Read issues.  (Read 6485 times)
n0ble
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 192


« on: December 08, 2014, 12:06:07 PM »

Hi,

Does anyone know how to bdm one of these ecus using bdm100 clone or fgtech.

I have used the Chinese bosch bdm jig but it will not connect to the ecu. A med9 mpc562 works fine but not MPC564.

Any ideas? Do you need to avoid using the Chinese bosch jig on these?

It won't even power up Nevermind ID, I assume this is to do with the Chinese bosch jig mot utilising the 3.3v pins?

Thanks
Logged
Aurélien
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 60


« Reply #1 on: December 10, 2014, 03:44:10 AM »

Have you ever though buying official tool ?  Wink
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #2 on: December 10, 2014, 12:31:18 PM »

3000$ for CMD BDM is a terrible price.
Logged
n0ble
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 192


« Reply #3 on: December 10, 2014, 02:34:35 PM »

Ofcourse I have thought about buying an official tool and if I was running a business in this line then I would. However I'm a hobbyist and make no money from this, so £3500 is a lot to spend to play around and get no financial return on my investment.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #4 on: December 10, 2014, 03:04:58 PM »

evc bdm is around 1k euro i think.
Logged
Aurélien
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 60


« Reply #5 on: December 11, 2014, 03:19:47 PM »

EVC BDM is 920€.

700€ if you make group buy and buy 20 units.

At least, it works.
Logged
n0ble
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 192


« Reply #6 on: January 01, 2015, 07:22:25 AM »

Yes I managed to get a used EVC BDM for €475
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.044 seconds with 16 queries. (Pretty URLs adds 0s, 0q)