Pages: 1 [2]
Author Topic: Cannot find CWKONLS  (Read 12209 times)
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123


« Reply #15 on: December 10, 2014, 04:10:26 PM »

One more question. What does it want me to change the decimal value 51 to? I assume set them all to zero?

Also """"     ESKONF[5] (0x10C7A) - set to 0xC0 (set bits 6 and 7)
    ESKONF[6] (0x10C7B) - set from 0xF3 to 0xFF (M-box) (set bits 2 and 3)
    ESKONF[6] (0x10C7B) - set to 0xC3 to 0xCF (L-box) (set bits 2 and 3) """
Whats does it mean by bits 6,7,2,3. There is only one value for each offset. Is it saying according to offset 0x10C75 change the 6th and 7th bit following offset 0x10c75??? Or only change 0x10C7B to 0xFF?Huh Bits 6 and 7 starting at 0x10C75 are 0x10C7B and 0x10C7C. If so they are contradicting themselves with bit 6 cause it is offset 0x10C7B.

« Last Edit: December 10, 2014, 04:50:27 PM by kingkhalilz » Logged
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640


« Reply #16 on: December 10, 2014, 04:46:30 PM »

One more question. What does it want me to change the decimal value 51 to? I assume set them all to zero?

Also """"     ESKONF[5] (0x10C7A) - set to 0xC0 (set bits 6 and 7)
    ESKONF[6] (0x10C7B) - set from 0xF3 to 0xFF (M-box) (set bits 2 and 3)
    ESKONF[6] (0x10C7B) - set to 0xC3 to 0xCF (L-box) (set bits 2 and 3) """
Whats does it mean by bits 6,7,2,3. There is only one value for each offset. Is it saying according to offset 0x10C75 change the 6th and 7th bit following offset 0x10c75???



Look at the xdf.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
nyet
Administrator
Hero Member
*****

Karma: +604/-167
Offline Offline

Posts: 12235


WWW
« Reply #17 on: December 10, 2014, 04:47:52 PM »

1 byte is made up of 8 bits.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123


« Reply #18 on: December 10, 2014, 04:52:34 PM »

Look at the xdf.

I see it it has 13 slots for numbers just like the binary all are one after another. So 0x10C7B is made up of 8 numbers combined to one number and that number is what is sitting in that offset??
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-167
Offline Offline

Posts: 12235


WWW
« Reply #19 on: December 10, 2014, 04:54:45 PM »

Forget about that for a moment. You need to understand this first:

"1 byte consists of 8 bits"
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640


« Reply #20 on: December 10, 2014, 05:13:50 PM »

00000000=00
11111111=FF
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123


« Reply #21 on: December 10, 2014, 06:21:27 PM »

And we are changing the Bytes. WOW!! I totally get it. I snagged a computer science major for a second, very simple. Thank you guys! What is the next step?? I want to go straight to figuring out the maps like IOP. Is this my next move??
Logged
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123


« Reply #22 on: December 10, 2014, 06:42:01 PM »

I set these to zero correct? It doesnt say what to do with these offsets.
"""""""""If you want to disable your EGT sensors:[56] (Note that my old M-box xdf is wrong[57] for CDATR/ATS. Please use these offsets.)

    CDATR (0x18196) - Configuration byte diagnosis exhaust gas temperature regulation
    CDATS (0x18197) - Configuration byte diagnosis exhaust gas temperature sensor """"""""""""""'

Also still missing all these
    ZATMIKML = 1
    ZATMIKKML = 1
    TABGMEX = F(max)
    TIKATMOE = 0
    ZATMKML = 1
    ZATMKKML = 1
    TKATMOE = 0
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)