Hi everyone, i have Alfa Romeo GT 1.9 JTD 150hp. i've been made a map for my car, i turn off my egr and put same tweeks on torque limiter, pressure limiter, injection time, Turbo boost.. etc..

i don't know how calculate the power and torque of this map, because i dont have mg/stroke in fuel quantity, i have torque,RPM..

As i know, EDC16 have diferent way to define injetion, is not mg/stroke.. how can i calculate the power and torque of this map?


Thank you.

ok, can you please show me the math? how can i do the calcs with Nm and RPM.
I use this maximum torque limiter on the picture?

anyway, for example, by default on original map @2000 RPM i had 355Nm of limit and in fact i had 305Nm@2000 RPM by Alfa Romeo specs.. (355-305= 50Nm of difference)

Now i have 443.5 Nm@2000RPM (more 25% of 355Nm), i can make direct calculation for the torque? 443.5Nm-50Nm= 393.5Nm@2000 RPM. its true? i'm sorry about this questions, i'm trying to understand.


This is my map.
https://mega.co.nz/#!w09gFSYA!87HMN5IHKvIjDv8Ghndnkx8TeSLojMcchlbcEh3UObM


Thank you.

Log injection qty and compare it with the map. For example 100mg means approx 500Nm

IQ x 4.96 = Nm

Density of diesel is 835 Kg/m3
which is 835,000,000 mg/m3
which is 0.835 mg/mm3

so 100 mm3 = 83.5 mg

With your experience, can you please analize my map, and give same feedback?