NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > What eeprom 06A 906 032 RE (solved)
Pages: [1]
« previous next »
Author Topic: What eeprom 06A 906 032 RE (solved)  (Read 4482 times)
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« on: December 23, 2014, 07:02:31 PM »
Trying to immo off a ME7.1.1 ecu VW part# 06A 906 032 RE
If I use the me7gui and use options for 95160 Pin 6.3 I get a bin file, but some code just doesn't look right.
I manually did immo off but no luck, Vag Com will only communicate with it once when plugged into the car and then I get no communication errors.
When it does communicate I get fault codes for eeprom errors.
Anyone now the eeprom this ecu uses?

Cheers
« Last Edit: December 24, 2014, 01:59:39 PM by nobug » Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: December 23, 2014, 07:06:08 PM »
Quote from: nobug on December 23, 2014, 07:02:31 PM
Trying to immo off a ME7.1.1 ecu VW part# 06A 906 032 RE
If I use the me7gui and use options for 95160 Pin 6.3 I get a bin file, but some code just doesn't look right.
I manually did immo off but no luck, Vag Com will only communicate with it once when plugged into the car and then I get no communication errors.
When it does communicate I get fault codes for eeprom errors.
Anyone now the eeprom this ecu uses?

Cheers



Whats the eeprom say? Try 5P08C3.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« Reply #2 on: December 23, 2014, 07:18:33 PM »
Quote from: ddillenger on December 23, 2014, 07:06:08 PM
Whats the eeprom say? Try 5P08C3.

OK thanks, will check it out tomorrow, first chance I get.
I tried to read the numbers on the eeprom but they are hardly visible even with a magnifying glass, I didn't see any numbers that looked familiar to me.
It probably is 5P08C3
Logged
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« Reply #3 on: December 24, 2014, 01:59:09 PM »
Solved

ECU had a 95160 eeprom, I had another ECU with the same part# so I opened it to read the # on the eeprom.
The problem was removing the resistor totally screwed with the reads and writes to the eeprom and I was not able to communicate with the ecu thru vcds.
Put a jumper back on it where the resistor was then I was able to read and write to the eeprom, vcds works like it should and everything is fine.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 09:29:46 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)