NefMoto > Technical > Cluster and Immobilizer > Original Cluster dump requests (Moderator: ddillenger) > Need cluster dump Audi A4 8E0920950P(x) 3.0l manual
Pages: [1]
« previous next »
Author Topic: Need cluster dump Audi A4 8E0920950P(x) 3.0l manual  (Read 9184 times)
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« on: December 30, 2014, 02:05:14 PM »
here is the situation i have here, i have a 2003 audi a4 3.0l  that came in with a bad cluster 8E0920950P could not talk to it at all, would not power on.

i purchase a used cluster with the same part number 8E0920950PX.  i was under the assumption the original cluster was an RB4 no way to tell for sure.
but the new one i received is RB8 and i seem to have screwed it up somehow. i cannot get it to adapt to the key/ecu.  i managed to reset the mileage to 0 and virginize the cluster but the vin shows up wrong in vag com and no matter what i do it still shows "safe" on the cluster

i dumped the following file with vag commander not sure if it right or not or i ruined it. but this is what i have.

also not sure if the RB8 is correct for this year , if its not can the RB4 dump be put into the RB8 cluster?
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: December 30, 2014, 02:39:40 PM »
Quote from: coreyj03 on December 30, 2014, 02:05:14 PM
here is the situation i have here, i have a 2003 audi a4 3.0l  that came in with a bad cluster 8E0920950P could not talk to it at all, would not power on.

i purchase a used cluster with the same part number 8E0920950PX.  i was under the assumption the original cluster was an RB4 no way to tell for sure.
but the new one i received is RB8 and i seem to have screwed it up somehow. i cannot get it to adapt to the key/ecu.  i managed to reset the mileage to 0 and virginize the cluster but the vin shows up wrong in vag com and no matter what i do it still shows "safe" on the cluster

i dumped the following file with vag commander not sure if it right or not or i ruined it. but this is what i have.

also not sure if the RB8 is correct for this year , if its not can the RB4 dump be put into the RB8 cluster?


No, you cannot just flash a different dump to an RBx crypto cluster.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #2 on: December 30, 2014, 03:14:50 PM »
well with that news i guess im looking for a rb8 950p dump. Sad
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #3 on: December 30, 2014, 03:26:27 PM »
Quote from: coreyj03 on December 30, 2014, 03:14:50 PM
well with that news i guess im looking for a rb8 950p dump. Sad

You can't do that either. The file you use must match the processor Sad

Have to use your dump. Rule of thumb, always save the original file both encrypted, and decrypted before playing with it. That way you can always recover.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #4 on: December 30, 2014, 03:49:53 PM »
Quote from: ddillenger on December 30, 2014, 03:26:27 PM
You can't do that either. The file you use must match the processor Sad

Have to use your dump. Rule of thumb, always save the original file both encrypted, and decrypted before playing with it. That way you can always recover.

well after "persuading" the old cluster i finally got it to boot up. and pulled this attached dump. it turns out to be RB8 anyway.

so to clarify i cannot just flash this original dump to my new cluster with same part number due to being match to the processor?

sorry for being a noob with clusters, just never messed with any crypto audi stuff just older VW's...
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #5 on: December 30, 2014, 03:53:59 PM »
can i patch the immobilizer info from the original cluster dump onto the new one ?  or am i just trying to make things harder.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #6 on: December 30, 2014, 03:59:41 PM »
youre fucked.
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #7 on: December 30, 2014, 04:06:21 PM »
haha ok thanks for giving it to me straight ian
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #8 on: December 31, 2014, 01:31:03 AM »
i do what i can.
what tool are you using for adapting?

youre best bet for cryptos is a genuine up-to-date tool. they are moody.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 05:58:44 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 17 queries. (Pretty URLs adds 0s, 0q)