14 point seven spartan wideband install

Pages: 1 [2]

« previous next »

Author

Topic: 14 point seven spartan wideband install (Read 11663 times)

zillarob

Full Member

Karma: +13/-1
Offline

Offline

Posts: 152

	Re: 14 point seven spartan wideband install « Reply #15 on: January 09, 2015, 10:29:21 PM »

You use the power, the ground, or both?

That last one did seem to read a little on the high side at idle with me7logger (zt3, 0.009766, -9.6).

The next one has a zt2 with the digital gauge and sits at 14.7 at idle.
Will have to grab some logs to see if they differ between zt2 hardware and me7logger on this one.


	Logged

stuklr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 147

	Re: 14 point seven spartan wideband install « Reply #16 on: January 10, 2015, 08:08:17 AM »

Julex found that the Spartans signal is distorted when connected to the ecu. His values seem to be spot on so far.

http://nefariousmotorsports.com/forum/index.php?topic=3731.120


	Logged

kingkhalilz

Full Member

Karma: +0/-0
Offline

Offline

Posts: 123

	Re: 14 point seven spartan wideband install « Reply #17 on: January 10, 2015, 12:06:00 PM »

Quote from: stuklr on January 10, 2015, 08:08:17 AM

Julex found that the Spartans signal is distorted when connected to the ecu. His values seem to be spot on so far.

http://nefariousmotorsports.com/forum/index.php?topic=3731.120

I think this is irrelevant because the signal wire is always wired to the 02 plug. not get 0-5v is independent of the wiring because DD was not getting 0-5v either. Good look tho, might need to use that correction to get an accurate reading.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 07:22:23 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search