Disabling VVT

Pages: 1 [2]

« previous next »

Author

Topic: Disabling VVT (Read 14464 times)

Lost

Hero Member

Karma: +21/-14
Offline

Offline

Posts: 556

	Re: Disabling VVT « Reply #15 on: February 01, 2015, 12:30:42 AM »

Quote from: masterj on January 31, 2015, 04:08:55 PM

So advancement is done backwards... OK, so if "default" (retarded) position is 18 then advanced will be -4. Weird compared to ignition where advancement is done by increasing number and retard by decreasing.

It is based on which side the cam is turning when retarded or advanced


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Disabling VVT « Reply #16 on: February 01, 2015, 01:06:29 AM »

From what I've seen:

All wideband ME7.5:
18=at rest, -4=advanced

BEL:
14=at rest, -8=advanced

APB:
0=at rest, 1=advanced

AWN (note, NOT AWM!):
0=at rest, 11=transitional, 22=advanced.

They are all different-lol.
Keep in mind, this is all from memory, so I may be mistaken.


« Last Edit: February 01, 2015, 01:12:25 AM by ddillenger »	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: Disabling VVT « Reply #17 on: February 02, 2015, 01:21:04 AM »

Quote from: ddillenger on February 01, 2015, 01:06:29 AM

Well i guess if im using ME7.5 for AGU engine, I'll just keep 18 then

Thanks for the info


	Logged

ME7Tuner Wizard

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	Re: Disabling VVT « Reply #18 on: February 03, 2015, 08:42:27 AM »

That would be backwards from all the other boxes them. On ME 7.1, advanced in "1", at rest (retarded) is 0
In Me 7.1.1 and RS4 it is "22" for advanced, 0 at rest.

Basically whatever you see in low load, low rpm, is value that is at rest. The VVT only kicks in mid-high low in low-mid rpms and is very obvious when you look at the map.


	Logged

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: Disabling VVT « Reply #19 on: February 03, 2015, 11:19:42 PM »

Quote from: julex on February 03, 2015, 08:42:27 AM

I see 18s almost in whole cam changeover table, only around where boost reaches max it is -4. So I guess it really is 18 (retarded) and -4 (advanced)


	Logged

ME7Tuner Wizard

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Disabling VVT « Reply #20 on: February 04, 2015, 12:27:50 AM »

Quote from: masterj on February 03, 2015, 11:19:42 PM

I see 18s almost in whole cam changeover table, only around where boost reaches max it is -4. So I guess it really is 18 (retarded) and -4 (advanced)

I told you it was. That has not changed.


	Logged

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: Disabling VVT « Reply #21 on: February 04, 2015, 11:17:06 AM »

Quote from: ddillenger on February 04, 2015, 12:27:50 AM

I told you it was. That has not changed.

yes you were right

thank you guys for all the answers


	Logged

ME7Tuner Wizard

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: Disabling VVT « Reply #22 on: February 14, 2015, 07:59:46 PM »

All this is not important. Log fnwue, if it is 0, then KFZW is read, if it is 1 then KFZW2.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 04:24:06 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search