Pages: [1]
Author Topic: FUEREG  (Read 4329 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« on: February 04, 2015, 11:25:56 AM »

Does anyone know what FUEREG module does? It outputs drlfue_w which corrects rlsol_w in BRLPSSOL when transferring air mass to required throttle plate angle.
Logged

ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: February 04, 2015, 11:27:21 AM »

Does anyone know what FUEREG module does? It outputs drlfue_w which corrects rlsol_w in BRLPSSOL when transferring air mass to required throttle plate angle.

There is a big thread about this, I'll try to find the link.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #2 on: February 04, 2015, 11:28:48 AM »

It is a PI regulator that corrects throttle plate angle based on the difference between rl and rlsol
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #3 on: February 05, 2015, 12:21:24 AM »

It is a PI regulator that corrects throttle plate angle based on the difference between rl and rlsol

Ah now I see, thanks
Logged

masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #4 on: February 05, 2015, 12:22:11 AM »

There is a big thread about this, I'll try to find the link.

Please do, I'm interested on ideas how people tune this module
Logged

masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #5 on: February 05, 2015, 10:57:27 AM »

BTW: most of the FUEREG is active ONLY during idle (whole bottom part as controlled by BBFUEREG). At least in my file the top part is disabled by ILMRMX = 0 and ILMRMN = 0. So I guess this whole module produces drlfue_w = 0 for the non-idle operation.
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)