NefMoto > ECU Files > Checksum Update Requests > 4B0906018DF checksum request
Pages: [1]
« previous next »
Author Topic: 4B0906018DF checksum request  (Read 7286 times)
z1ck
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 17
« on: February 05, 2015, 06:22:42 AM »
Hello.
I did changes in my stock ECU 4B0906018DF (I changed some addreeses for Launch Control)
The ori file is calculated OK:
Code:
c:\me7>ME7Check.exe "4B0906018DF.ori"
===================================================
ME7Check v1.12 (c) mki, 06/2004-05/2012
Checking file 4B0906018DF.ori (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4016.31//24b/Dst01o/220301//
-> Contents of ECUID data table:
   - '0261207639'         (SSECUHN)
   - '1037362361'         (SSECUSN)
   - '4B0906018DF '       (VAG part number)
   - '0001'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

-> No errors found. File is OK.   *****************
Code:
c:\me7>me7sum.exe "4B0906018DF.ori"
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file '4B0906018DF.ori'

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.5/5/4016.31//24b/Dst01o/220301//'
 Part Number : '4B0906018DF '
 Engine ID   : '1.8L R4/5VT     '
 SW Version  : '0001'
 HW Number   : '0261207639'
 SW Number   : '1037362361'

Step #2: Reading ROMSYS ..
 Startup section: word[0x008000]+word[0x00FFFE]
 @008038 Add=0x00A8B5 CalcAdd=0x00A8B5  ADD OK
 Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
 @00803c Add=0x9E5489 CalcAdd=0x9E5489  ADD OK
 All param page: word[0x010000]+word[0x01FFFE]
 @01befa Add=0x00971D CalcAdd=0x00971D  ADD OK

Step #3: Reading RSA signatures ..
 Searching for RSA offset #0...missing
 Searching for RSA offset #1...missing

Step #4: Finding CRC table(s) ..
 Searching for CRC table(s)...OK
 CRC table(s) OK

Step #5: Reading Main Data Checksums ..
 Searching for main data CRC pre block...OK
 Searching for main data CRC/csum blocks...OK
 Searching for main data CRC offsets...OK
 Searching for main data checksum offsets...missing
 Main CRCs:
 0) 0x0183BC-0x0183C5                      CalcCRC: 244E4C69
 1) 0x010002-0x013FFE @90000 CRC: 89F323B6 CalcCRC: 89F323B6(r) CRC OK
 2) 0x014252-0x017F4E @90006 CRC: 22D8898C CalcCRC: 22D8898C(r) CRC OK
 3) 0x018192-0x01FBDC                      CalcCRC: 5CE05A9E(r)
 4) 0x026A00-0x02FFFC @9000c CRC: 1E247AAF CalcCRC: 1E247AAF(r) CRC OK

Step #6: Reading Main Program Checksums ..
 Searching for main program checksum..OK
 ROM Checksum Block Offset Table @1fbc8 [16 bytes]:
 1) 0x000000-0x00FBFF CalcChk: 48D08844
    0x00FC00-0x01FFFF CalcChk: 23A9215B CalcCRC: D55E5E30 SKIPPED
 2) 0x020000-0x0FFFFF
    <fffe0>  Chk: 3E128447 CalcChk: 3E128447 OK (i)

Step #7: Reading Multipoint Checksum Blocks ..
 Searching for multipoint block descriptor #1...missing
 Searching for multipoint block descriptor #2...OK
 1) <1fbde>  0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
 2) <1fbee>  0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
 3) <1fbfe>  0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
 4) <1fc0e>  0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
 Multipoint #2: [66 blocks x <16> = 1056 bytes]

*** Found 71 checksums in 4B0906018DF.ori

*** DONE! 0 error(s) in 4B0906018DF.ori! ***

I did modify it (4B0906018DF(lc).bin). Then tried to calculate checksum:
Code:
c:\me7>me7sum.exe "4B0906018DF(lc).bin" "4B0906018DF(lcandsum).bin"
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file '4B0906018DF(lc).bin'

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.5/5/4016.31//24b/Dst01o/220301//'
 Part Number : '4B0906018DF '
 Engine ID   : '1.8L R4/5VT     '
 SW Version  : '0001'
 HW Number   : '0261207639'
 SW Number   : '1037362361'

Step #2: Reading ROMSYS ..
 Startup section: word[0x008000]+word[0x00FFFE]
 @008038 Add=0x00A8B5 CalcAdd=0x00A8B5  ADD OK
 Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
 @00803c Add=0x9E5489 CalcAdd=0x9E5489  ADD OK
 All param page: word[0x010000]+word[0x01FFFE]
 @01befa Add=0x00971D CalcAdd=0x00971D  ADD OK

Step #3: Reading RSA signatures ..
 Searching for RSA offset #0...missing
 Searching for RSA offset #1...missing

Step #4: Finding CRC table(s) ..
 Searching for CRC table(s)...OK
 CRC table(s) OK

Step #5: Reading Main Data Checksums ..
 Searching for main data CRC pre block...OK
 Searching for main data CRC/csum blocks...OK
 Searching for main data CRC offsets...OK
 Searching for main data checksum offsets...missing
 Main CRCs:
 0) 0x0183BC-0x0183C5                      CalcCRC: 244E4C69
 1) 0x010002-0x013FFE @90000 CRC: 89F323B6 CalcCRC: BCAC1792(r) ** FIXED **
 2) 0x014252-0x017F4E @90006 CRC: 22D8898C CalcCRC: C1F09246(r) ** FIXED **
 3) 0x018192-0x01FBDC                      CalcCRC: AC535AA3(r)
 4) 0x026A00-0x02FFFC @9000c CRC: 1E247AAF CalcCRC: E49DFC8E(r) ** FIXED **

Step #6: Reading Main Program Checksums ..
 Searching for main program checksum..OK
 ROM Checksum Block Offset Table @1fbc8 [16 bytes]:
 1) 0x000000-0x00FBFF CalcChk: 48D08844
    0x00FC00-0x01FFFF CalcChk: 23A7FC14 CalcCRC: C0958A50 SKIPPED
 2) 0x020000-0x0FFFFF
    <fffe0>  Chk: 3E128447 CalcChk: 3E149B06 ** FIXED **

Step #7: Reading Multipoint Checksum Blocks ..
 Searching for multipoint block descriptor #1...missing
 Searching for multipoint block descriptor #2...OK
 1) <1fbde>  0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
 2) <1fbee>  0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
 3) <1fbfe>  0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
 4) <1fc0e>  0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
 Multipoint #2: [66 blocks x <16> = 1056 bytes]

*** Found 71 checksums in 4B0906018DF(lc).bin

Attempting to output corrected firmware file '4B0906018DF(lcandsum).bin'
├╛ Opening '4B0906018DF(lcandsum).bin' file for writing
├╛ Writing to file
├╛ Validating size correct 1048576=1048576
├╛ All OK, closing file

*** DONE! 8/8 error(s) in 4B0906018DF(lc).bin corrected in 4B0906018DF(lcandsum)
.bin! ***
Looks good. But this file can not calculated:
Code:
c:\me7>ME7Check.exe "4B0906018DF(lcandsum).bin"
======================================================
ME7Check v1.12 (c) mki, 06/2004-05/2012
Checking file 4B0906018DF(lcandsum).bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4016.31//24b/Dst01o/220301//
-> Contents of ECUID data table:
   - '0261207639'         (SSECUHN)
   - '1037362361'         (SSECUSN)
   - '4B0906018DF '       (VAG part number)
   - '0001'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

Romsys checksum failure(s) found
-> Found 1 error!!!   *******************************
Code:
c:\me7>me7sum.exe "4B0906018DF(lcandsum).bin"
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file '4B0906018DF(lcandsum).bin'

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.5/5/4016.31//24b/Dst01o/220301//'
 Part Number : '4B0906018DF '
 Engine ID   : '1.8L R4/5VT     '
 SW Version  : '0001'
 HW Number   : '0261207639'
 SW Number   : '1037362361'

Step #2: Reading ROMSYS ..
 Startup section: word[0x008000]+word[0x00FFFE]
 @008038 Add=0x00A8B5 CalcAdd=0x00A8B5  ADD OK
 Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
 @00803c Add=0x9E4865 CalcAdd=0x9E5489 ** NOT OK **
 All param page: word[0x010000]+word[0x01FFFE]
 @01befa Add=0x00971D CalcAdd=0x00971D  ADD OK

Step #3: Reading RSA signatures ..
 Searching for RSA offset #0...missing
 Searching for RSA offset #1...missing

Step #4: Finding CRC table(s) ..
 Searching for CRC table(s)...OK
 CRC table(s) OK

Step #5: Reading Main Data Checksums ..
 Searching for main data CRC pre block...OK
 Searching for main data CRC/csum blocks...OK
 Searching for main data CRC offsets...OK
 Searching for main data checksum offsets...missing
 Main CRCs:
 0) 0x0183BC-0x0183C5                      CalcCRC: 244E4C69
 1) 0x010002-0x013FFE @90000 CRC: BCAC1792 CalcCRC: BCAC1792(r) CRC OK
 2) 0x014252-0x017F4E @90006 CRC: C1F09246 CalcCRC: C1F09246(r) CRC OK
 3) 0x018192-0x01FBDC                      CalcCRC: AC535AA3(r)
 4) 0x026A00-0x02FFFC @9000c CRC: E49DFC8E CalcCRC: E49DFC8E(r) CRC OK

Step #6: Reading Main Program Checksums ..
 Searching for main program checksum..OK
 ROM Checksum Block Offset Table @1fbc8 [16 bytes]:
 1) 0x000000-0x00FBFF CalcChk: 48D08844
    0x00FC00-0x01FFFF CalcChk: 23A7FC14 CalcCRC: B454C5FE SKIPPED
 2) 0x020000-0x0FFFFF
    <fffe0>  Chk: 3E149B06 CalcChk: 3E149B06 OK (i)

Step #7: Reading Multipoint Checksum Blocks ..
 Searching for multipoint block descriptor #1...missing
 Searching for multipoint block descriptor #2...OK
 1) <1fbde>  0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
 2) <1fbee>  0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
 3) <1fbfe>  0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
 4) <1fc0e>  0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
 Multipoint #2: [66 blocks x <16> = 1056 bytes]

*** Found 71 checksums in 4B0906018DF(lcandsum).bin

*** WARNING! 1/1 uncorrected error(s) in 4B0906018DF(lcandsum).bin! ***

Any help with it?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12269


WWW
« Reply #1 on: February 05, 2015, 11:13:42 AM »
Looks like a bug in me7sum. You can run the file through me7sum again, it should fix it.

I'll look into why it requires being run twice.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #2 on: March 27, 2015, 07:11:01 PM »
Hi z1ck do you have the 95040 OEM dump from that ECU?
Thanks,
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 12:36:29 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0.003s, 0q)