Pages: [1]
Author Topic: 225HP TT's are the 018CB and 018CJ cross flashable?  (Read 5697 times)
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 146


« on: February 26, 2015, 09:14:28 PM »

I have an 018CJ ecu here and have a nice .xdf that I organized for the 018CB 003 software. Can I just flash the ecu with CB and move on, or do I have to retain the 018CJ base?
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #1 on: February 26, 2015, 11:08:15 PM »

Compare the bootroms bruh. If they match, you may cross flash.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #2 on: February 26, 2015, 11:09:37 PM »

Compare the bootroms bruh. If they match, you may cross flash.

Memory locations?
« Last Edit: February 27, 2015, 12:23:53 AM by vwaudiguy » Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 146


« Reply #3 on: February 27, 2015, 07:29:14 PM »

Looks like both are 05.12 Good to go! Thanks Daz
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #4 on: February 27, 2015, 08:19:20 PM »

Looks like both are 05.12 Good to go! Thanks Daz

Are you getting this from me7check? Are there ways to compare the code in the beginning of the flash?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #5 on: February 27, 2015, 08:24:45 PM »

Are you getting this from me7check? Are there ways to compare the code in the beginning of the flash?

The output of me7check is very useful. You can see the bootrom, as well as the damos that matches the file.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #6 on: February 27, 2015, 08:25:55 PM »

The output of me7check is very useful. You can see the bootrom, as well as the damos that matches the file.

Good to know. I should start using it more often.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 146


« Reply #7 on: March 02, 2015, 07:30:20 AM »

Yeah ME7check is great. I set it up as a tunerpro shortcut too. just a shift+C away.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #8 on: June 19, 2015, 11:50:36 PM »

-> Bootrom Version = embedded in CPU, asume 05.12/05.32
-> EPK = 40/1/ME7.1/3/6028.01//22Q/Dst01o/140303//
-> Contents of ECUID data table:
   - '0261208313'         (SSECUHN)         
   - '1037367731'         (SSECUSN)         
   - '3B0907551DB '       (VAG part number)
   - '0010'               (VAG sw number)   
   - '2.8L V6/5V      '   (engine id)       
-> Contents of ECUID data table:
   - 'HW_MAN004'                           

What line/values refer to what damos to use?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)