NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > general question on eeproms
Pages: [1]
« previous next »
Author Topic: general question on eeproms  (Read 4224 times)
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« on: March 03, 2015, 03:56:28 PM »
I have been reading about matching the VIN# and immo key that follows the SKC code in the ecu and cluster eeproms.
I have been searching and reading but haven't found an answer to my concerns.

If you alter these bin files would you not need to correct the checksums?
The reason I ask is I can not find any info on checksum correction for eeproms, I have tried ME7CHECK, but get "wrong file size" message.
I have tried ME7Check on different ecu files and it works properly
I have modded a file to turn the immo off and checking both versions of the file with the hex editor I get a different checksum.
Is this a concern for eeprom files?

I can match the keys after, that is not a problem.
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: March 03, 2015, 04:53:24 PM »
Quote from: nobug on March 03, 2015, 03:56:28 PM
I have been reading about matching the VIN# and immo key that follows the SKC code in the ecu and cluster eeproms.
I have been searching and reading but haven't found an answer to my concerns.

If you alter these bin files would you not need to correct the checksums?
The reason I ask is I can not find any info on checksum correction for eeproms, I have tried ME7CHECK, but get "wrong file size" message.
I have tried ME7Check on different ecu files and it works properly
I have modded a file to turn the immo off and checking both versions of the file with the hex editor I get a different checksum.
Is this a concern for eeprom files?

I can match the keys after, that is not a problem.

Yes, you must correct checksums. You should search for 94040sum on this site Smiley
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« Reply #2 on: March 03, 2015, 06:07:46 PM »
I have tried the EEPROMTOOL and the 95040SUM they both change the last half of a 1K file.
I am working with a 95P08 bin file.

Could I split the file in half and work with it and then just FF the last half when done?
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #3 on: March 03, 2015, 06:59:25 PM »
Quote from: nobug on March 03, 2015, 06:07:46 PM
I have tried the EEPROMTOOL and the 95040SUM they both change the last half of a 1K file.
I am working with a 95P08 bin file.

Could I split the file in half and work with it and then just FF the last half when done?



You can split the file, checksum it, then just copy the changes into the original, or copy the entire first 512kb into it.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« Reply #4 on: March 03, 2015, 07:11:46 PM »
Thanks for the replies ddillenger
Appreciate your help.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 25, 2024, 02:44:47 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 16 queries. (Pretty URLs adds 0s, 0q)