Timing not following

Pages: [1]

« previous next »

Author

Topic: Timing not following (Read 5926 times)

4ringpieces

Full Member

Karma: +4/-4
Offline

Offline

Posts: 232

	Timing not following « on: March 07, 2015, 05:35:37 PM »

What is the map/correction factor name for timing vs iat? if there is one I've checked a few damos and cannot find anything around the timing maps

In my logs and my timing actual isn't following the kfzw/kfzw2 its about 5degrees off in places.

No knock cf's when this happens.
Iat's are going high tho 50-60celsius @6000rpm
Torque intervention turned off or on makes no difference, but found with torque intervention off I had less knock cf's when abusing the car but slightly more spikey boost control.
Throttle is staying @100 during the run

Car does have an over-reading maf sensor as there's no way this 1.8t ko3 is pulling 210g/s when its boosting 1.3bar, This will be changed soon so hopefully this is the problem. But i'm wondering if i'm missing something else?


	Logged

Lost

Hero Member

Karma: +21/-14
Offline

Offline

Posts: 556

	Re: Timing not following « Reply #1 on: March 08, 2015, 01:22:17 AM »

If you mean that actuall in the logs is a bit higher than the values you have in kfzw/2 ??
It Is bc kfzw/2 is trying too come up too timing optimal kfzwop/2.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Timing not following « Reply #2 on: March 08, 2015, 01:25:04 AM »

Quote from: Mocke on March 08, 2015, 01:22:17 AM

If you mean that actuall in the logs is a bit higher than the values you have in kfzw/2 ??
It Is bc kfzw/2 is trying too come up too timing optimal kfzwop/2.

No. Please don't present wild guesses as conclusive answers Sad

OP: Please post logs.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

4ringpieces

Full Member

Karma: +4/-4
Offline

Offline

Posts: 232

	Re: Timing not following « Reply #3 on: March 08, 2015, 02:46:40 AM »

Logs are just poor vcds ones tbh nyet

Timing was much lower than kfzw, only reason I could see was iat its over 40-50deg c and the maf over reads

kftarx I did modify to counter the heat from the amount of load on long pulls at high rpm by dropping it down. but can this affect the timing aswell? Even when torque monitoring is off?

Maybe just a bad maf but thought I'd check


	Logged

Lost

Hero Member

Karma: +21/-14
Offline

Offline

Posts: 556

	Re: Timing not following « Reply #4 on: March 08, 2015, 04:41:37 AM »

Quote from: nyet on March 08, 2015, 01:25:04 AM

No. Please don't present wild guesses as conclusive answers Sad

OP: Please post logs.

When you start a sentence with "If" , it is an assumption. Not conclusion. You should know that master N. Anyway - we always have you too straight us upp Wink


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Timing not following « Reply #5 on: March 08, 2015, 02:22:17 PM »

Quote from: Fordy on March 08, 2015, 02:46:40 AM

Logs are just poor vcds ones tbh nyet

You won't be able to fix anything w/o proper logs.

Quote

Even when torque monitoring is off?

I doubt torque monitoring is "off"

Quote

Maybe just a bad maf but thought I'd check

Log, don't guess.


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Timing not following « Reply #6 on: September 14, 2015, 10:59:35 AM »

Any updates on this, Fordy? I'm having a similar issue.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Timing not following « Reply #7 on: September 14, 2015, 11:02:20 AM »

Quote from: vwaudiguy on September 14, 2015, 10:59:35 AM

Any updates on this, Fordy? I'm having a similar issue.

Post logs.


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Timing not following « Reply #8 on: September 14, 2015, 01:13:18 PM »

There should be a requirement to post logs.

This thread is just going round in circles.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 10:45:20 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search