NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Deciphering SKC from cluster...
Pages: 1 [2]
« previous next »
Author Topic: Deciphering SKC from cluster...  (Read 13471 times)
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #15 on: March 18, 2015, 02:20:38 PM »
Bootmode the eeprom from the ecu. That's the safest bet.

TT/Beetle MM clusters are a dangerous proposition, even with real tools sometimes.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
04 Beetle
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11
« Reply #16 on: March 18, 2015, 03:06:19 PM »
Thank you, gents, for all the help thus far. I am glad I asked before doing something stupid and bricking my dash.

If I am understanding everything correctly here (excuse me if I don't make sense):
1. Bootmode the eeprom from the ecu with argdub's tool 7.5?
2. Read the SKC from the ecu under what fields?

Again, sorry for all the questions...it is making sense, though! :-)

Cheers!
Logged
04 Beetle
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11
« Reply #17 on: March 18, 2015, 03:18:17 PM »
Just a brain fart...what if I only use a clone VT to read the SKC from the dash. My intention was not on utilizing VT to program the immo, but just read the SKC. I was set on using VCDS to perform any type of programming.

Does that minimize my exposure of bricking the dash? Embarrassed
Logged
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619
« Reply #18 on: March 18, 2015, 03:42:30 PM »
Clone VT is a pos, as a last resort maybe try reading, but I would do as dd suggested first.
Logged
04 Beetle
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11
« Reply #19 on: March 18, 2015, 08:38:55 PM »
Quote from: turboat on March 18, 2015, 03:42:30 PM
Clone VT is a pos, as a last resort maybe try reading, but I would do as dd suggested first.

I will do as ddillenger stated, thank you! One problem; what software do I use and how what fields do I read the SKC from?

Cheers!
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #20 on: March 19, 2015, 12:36:50 AM »
Quote from: aef on March 17, 2015, 03:41:15 AM
What engine is in there? Maybe its easier to read the eprom from your ecu. Thats the same SKC i guess.

use this: http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=

Read should work in car without bootmode.
me7_95040.exe --OBD -p 3 -b 57600 -r readout.bin

Use a dumb KKL cable
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #21 on: March 19, 2015, 08:04:40 AM »
Quote from: aef on March 19, 2015, 12:36:50 AM
use this: http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=

Read should work in car without bootmode.
me7_95040.exe --OBD -p 3 -b 57600 -r readout.bin

Use a dumb KKL cable

711 does not use a 95040. (im assuming this is a 2.0l beetle btw).
Logged
04 Beetle
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11
« Reply #22 on: March 19, 2015, 11:06:03 AM »
Quote from: k0mpresd on March 19, 2015, 08:04:40 AM
711 does not use a 95040. (im assuming this is a 2.0l beetle btw).

Yes...this is an 04 Beetle 2.0.

Thanks!
Logged
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 06:03:47 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)