I can see that I can connect to 17cluster using vagcanpro  and read part of eeprom but just 248bits of if when start from adress $100 of it instead of 2048 as in other dumps. Do You know where is it located or how to read it?


Wysłane z mojego HTC U11 przy użyciu Tapatalka

Well clone worked very well to change eeprom in 5f mmi3g+ in USA to eu conversion,  why won't it work with instrument?

Wysłane z mojego HTC U11 przy użyciu Tapatalka

What do you mean tuned?

Hi everybody,
Temporarily I'm not into tuning clusters. I've changed my job and now there is less time for my hobby (clusters & ecu). Also I've changed my car to a newer, so there is no real car to make experiments. It doesn't mean I quit. Post your dumps here, ask here and maybe I or someone else will answer.

In general the steps how to modify cluster is very simple:
- You should read dump of your original cluster
- Optionally, get dump of the other cluster, covers of which you like (ask those who own such clusters or find in the internet)
- Find curves in the dump (tables with arrow positions). When you open them in WinOls or in something similar you will see shapes
- Change them, or just copy paste areas from the cluster you know fits your covers
- Load the new dump into your cluster
- Enjoy result

Perfect I do have 17.3 vcds cable from aliexpress. Can I use it for Kombiinstr J285, 8R0920981N, driver H35 soft 0567 with vag eeprom programmer.  If yes can You please describe which values to use with it to read eeprom from my car?

Wysłane z mojego HTC U11 przy użyciu Tapatalka

it fucks my coding up at a mk5 and mk6.

Only thing which I can get thru vagcanpro is to read a few bytes from $100 as on pictures but nothing comparable with posted above Marelli pattern

Wysłane z mojego HTC U11 przy użyciu Tapatalka