NefMoto > Technical > Tuning > Is ME9.1 compatible with each other
Pages: [1]
« previous next »
Author Topic: Is ME9.1 compatible with each other  (Read 5810 times)
Iceman160785
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« on: March 19, 2015, 03:51:44 PM »
Hey!

Mybe a noob  question  Embarrassed  But i ask anyway! Cheesy  Is all  VAG ME9.1 compatible with each other? i mean is it poosible to use Golf 6 2.0TFSI software on a Audi S3 2.0TFSI ECU? Huh  Hope you can take your time to answar me on this!?  Thanks Guys! Grin
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: March 19, 2015, 04:00:23 PM »
Yes. All 2.0 FSI ecus are the same, with the exception of the GolfR
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Iceman160785
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #2 on: March 19, 2015, 04:12:25 PM »
Ok thanks for fast answear! Grin  So the Golf R Ecu is special? and not compitable?
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #3 on: March 20, 2015, 06:10:41 AM »
MED9.5 I believe, similar to Audi RS6 and TT-RS ecu's, quite different in some ways from the earlier MED9.1 stuff.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #4 on: March 20, 2015, 10:03:07 AM »
Golf R uses the same ECU as ANY other 2.0 TFSI with MED9.1.

TT-RS and RS6 ECUs are also not 100% the same and not compatible, and they are MED9.1.2, not MED9.5.
« Last Edit: March 20, 2015, 10:11:00 AM by IamwhoIam » Logged
I have no logs because I have a boost gauge (makes things easier)
RaraK
Hero Member
*****

Karma: +58/-2
Offline Offline

Posts: 539
« Reply #5 on: March 20, 2015, 10:21:16 AM »
Quote from: Iceman160785 on March 19, 2015, 03:51:44 PM
Hey!

Mybe a noob  question  Embarrassed  But i ask anyway! Cheesy  Is all  VAG ME9.1 compatible with each other? i mean is it poosible to use Golf 6 2.0TFSI software on a Audi S3 2.0TFSI ECU? Huh  Hope you can take your time to answar me on this!?  Thanks Guys! Grin


Not necessarily, there are some differences in SOFTWARE that will not work directly, as well as hardware on the specific car, Dash, Sensors, Turbo, etc.....
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #6 on: March 20, 2015, 12:31:13 PM »
Quote from: IamwhoIam on March 20, 2015, 10:03:07 AM
Golf R uses the same ECU as ANY other 2.0 TFSI with MED9.1.

TT-RS and RS6 ECUs are also not 100% the same and not compatible, and they are MED9.1.2, not MED9.5.

Thanks for clearing that up.
Don't remember all the denominations, but TT-RS and RS6 both had a different MPC chip inside IIRC and some of the torque control was different. Some traces of MED17 were present too.
Been a bit now since I had either of those on the table.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #7 on: March 21, 2015, 12:37:10 PM »
I usually have meals on my table Cheesy
Logged
I have no logs because I have a boost gauge (makes things easier)
Iceman160785
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #8 on: March 21, 2015, 02:54:26 PM »
Ok Thaks for input guys!:)   When it comes  to hardware/Engine Golf R TFSI and  Audi S3 2.0TFSI  is all the same.  Reason i ask  i have  a  good Golf R file that i want to use in my S3. but have been  told i maybe brick my ecu if i flash with Golf R file. checksum calculation is not any problem . You think this will happend?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #9 on: March 21, 2015, 03:46:56 PM »
Quote from: Iceman160785 on March 21, 2015, 02:54:26 PM
Ok Thaks for input guys!:)   When it comes  to hardware/Engine Golf R TFSI and  Audi S3 2.0TFSI  is all the same.  Reason i ask  i have  a  good Golf R file that i want to use in my S3. but have been  told i maybe brick my ecu if i flash with Golf R file. checksum calculation is not any problem . You think this will happend?

You shouldn't do that. The ecu won't brick, but the software is very chassis specific.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Iceman160785
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #10 on: March 21, 2015, 03:57:39 PM »
Thanks ddillenger! Smiley  What will  most likely happen if i try?Smiley car will not start? or will not run good?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 03:52:29 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)