Pages: [1]
Author Topic: B5 A4 cluster temp gauge linearization  (Read 3489 times)
MadCow
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 108


« on: March 29, 2015, 03:42:15 PM »

I recently found out about MK4 R32 owners modifying their cluster EEPROM to have a linear temp gauge response curve rather than the stepped curve that holds it in the middle through the range of normal operating temperatures. I tried to do that with my cluster but I can't find anything in my EEPROM that looks remotely close to what I'm looking for. Is this even possible with a B5 cluster or am I not looking hard enough?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: March 29, 2015, 06:55:23 PM »

i did this a looong time ago. i may still have the modified e2p file somewhere. ill take a look.
Logged
keithwbloom
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 43


« Reply #2 on: March 30, 2015, 02:46:55 PM »

There's a write up on this on ClubTDI forums.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)