Pages: [1]
Author Topic: Strange VAG number of the engine ECU  (Read 8519 times)
Neno-ri
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 33



« on: April 25, 2015, 02:15:11 PM »

Hi.

I went do diagnose one golf4 tdi and while connecting I've got a strange VAG number of the controller. Here is a snapshot.

Anyone has any idea?

Tnx!
Logged

cerips
Full Member
***

Karma: +3/-2
Offline Offline

Posts: 118


« Reply #1 on: April 25, 2015, 03:33:56 PM »

Chipped by http://www.biltuning.no ?
Logged
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260


« Reply #2 on: April 25, 2015, 04:34:59 PM »

"Baustufe" is german. Maybe its a pre-series ecu?
Logged
Neno-ri
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 33



« Reply #3 on: April 26, 2015, 02:24:33 AM »

Could be. I found out that this was taken from golf mk3 which was developed by vw motorsports for racing purpose. this engine is suppose to have 250 bhp.
The ECU looks like a standard EDC15 from the outside.
Logged

prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6040


« Reply #4 on: April 26, 2015, 10:21:05 AM »

Could you read the file please and post it?

I am curious about the checksum bypass on EC15.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Neno-ri
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 33



« Reply #5 on: April 26, 2015, 10:27:20 AM »

I've tried to read it with galletto v54 over k-line but it stops after 28%. I guess it is protected. Any ideas on how I might read it?
Logged

ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #6 on: April 26, 2015, 12:45:50 PM »

Bootmode.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Neno-ri
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 33



« Reply #7 on: April 26, 2015, 01:27:58 PM »

Bootmode means I have to open the ecu and the owner is a bit concerned that something might go wrong. So unfortunately this is not the option.
Logged

prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6040


« Reply #8 on: April 27, 2015, 07:46:19 AM »

Bootmode means I have to open the ecu and the owner is a bit concerned that something might go wrong. So unfortunately this is not the option.

I doubt it's protected, probably you have crappy galletto 2 clone with bad K-line drivers and resistors.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Neno-ri
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 33



« Reply #9 on: April 27, 2015, 02:59:56 PM »

Here is some more details of the ECU:
Bosch EDC15V-5.36
0 281 001 733

I've opened the ecu and found out two B58399 eprom chips. (equivalent 29f010). Probably hi/lo configuration. This is why I've had no success with galletto.

I ordered an eprom programmer so as soon as I get it I'll read the chips.

Here are some photos of the ecu:
Logged

Neno-ri
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 33



« Reply #10 on: April 27, 2015, 03:03:04 PM »

I doubt it's protected, probably you have crappy galletto 2 clone with bad K-line drivers and resistors.

Galletto is a decent clone. I've tried k-line on me7.3.1 and it works good. Tested with multiple reads/writes and no problem.
Logged

n0ble
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 192


« Reply #11 on: April 28, 2015, 05:50:46 PM »

Looking at that board I you'll struggle to read over obd, as you said... Read with eprom reader
Logged
Neno-ri
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 33



« Reply #12 on: May 02, 2015, 06:47:47 AM »

Here are the files. I didn't went to analyse them yet but if anyone has damos for this combination and willing to share I'd like to have it  Smiley
Logged

_mumin_
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 46


« Reply #13 on: May 11, 2015, 10:30:02 PM »

Can You read EEPROM also ?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)